Lamp Replacement - Samsung SP-H700AE Owner's Instructions Manual

Structure of Screen Menu
Menu Option
√
Language : English
Menu Position √
√
Menu Translucency : Opaque
Menu Display Time : 120 Sec √
Move Enter Return
Menu Option
Language
Menu Position
Menu Translucency
Menu Display Time
80
English / Español / Français /
Opaque / High / Medium / Low
5 / 10 / 30 / 60 / 90 / 120 / Stay On

Lamp Replacement

Cautions on Lamp Replacement
I
Projector lamp requires replacement after.
I
Use the recommended lamp when replacing. Lamp specifications are defined in the user's
manual. Replace with the same model provided with the projector.
- Lamp Model Name : LAMP-MERCURY-Philips
- Lamp Manufacture : Philips Lighting
- Lamp Life Time : 2000Hrs
- Lamp Type : 250W UHP
- Lamp Part Number : BP47-00010A
I Check that the power cord is unplugged before replacing lamps.
I Wait for at least 30 minutes before replacing lamps to cool off the lamp unit after
disconnecting power.
I Lamp is a high-pressure product. Do not place near flammable materials or children.
I Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum
device.
I Be careful not to touch the lamp itself when handling the lamp unit.
I If the lamp is poorly handled, it may result in poor picture quality or shorter life time of
lamp.
I The projector is will not operate normally if the cover is not locked completely after lamp
replacement. Refer to LED information in the user's manual if the projector does not operate
normally.
Lamp Replacement Procedure
1 Detach the screw of the 2 Push to open the lamp
lamp cover. cover in the direction of
the arrow.
4 Lift and grip the lamp 5 Reverse the disassembly
handle in the direction of procedure to assemble the
the arrow and pull it out. unit after replacement.
3 Detach the three screws.
I The Lamp is high-
temperature high-
NOTE
pressure product.
Wait for at least 30
minutes to proceed after
disconnecting power.
I
Be sure that the power
cord is disconnected
before proceeding.
81