Mercedes-Benz A-Class 2021 Operator's Manual page 274

272 Breakdown assistance
Therefore, place the filling hose in the
#
plastic bag that contained the TIREFIT
kit.
+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre‐
sponsible disposal
Tire sealant contains pollutants.
Have the tire sealant bottle disposed of
#
professionally, e.g. at an authorized
Mercedes-Benz Center.
Store the tire sealant bottle and the tire infla‐
#
tion compressor.
Pull away immediately.
#
Stop driving after approximately ten minutes
#
and check the tire pressure using the tire
inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
& WARNING Risk of accident due to the
specified tire pressure not being attained
If the specified tire pressure is not reached,
the tire is too badly damaged. The tire seal‐
ant cannot repair the tire in this instance.
The braking and driving characteristics may
be greatly impaired.
Do not continue driving.
#
Consult a qualified specialist workshop.
#
In cases such as the one mentioned above, con‐
tact an authorized Mercedes-Benz Center. Or
call 1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
Correct the tire pressure if it is still at least
#
130 kPa (1.3 bar/19 psi). See the Tire and
Loading Information placard on the B‑pillar
on the driver's side or the tire pressure table
in the fuel filler flap for values.
Increasing the tire pressure
Switch on the tire inflation compressor.
#
Decreasing the tire pressure
Remove the tire sealant bottle from the tire
#
inflation compressor.
Insert the filler hose in the socket of the tire
#
inflation compressor and turn it a quarter
turn clockwise.
Press pressure release button C
#
manometer B.
When the tire pressure is correct
Unscrew the filling hose from the valve of the
#
sealed tire.
next to