Storage; Spare Parts/Accessories; Disposal, Environmental Protection; Technical Specifications - Grizzly EGT 1440 Instructions For Use Manual

Storage

• Leave the motor to cool down before
you put the tool into a closed space.
• Keep the tool clean, dry and out of the
reach of children.
• Do not wrap the equipment in plastic
bags as damp could form.
Release the tightening levers
(7+10) and fold the upper handle
(6) and centre handle (9) down-
wards so that the device takes up
less space.
The cables must not be jammed
when you do this.
The device must not be used
if the handles are folded over.
Risk of injury.

Spare Parts/Accessories

Spare parts and accessories can be
obtained at www.grizzly-service.eu
If you do not have internet access, please
contact the Service Center via telephone
(see "Grizzly Service-Center").
Disposal, environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Do not dispose of electrical appli-
ances in household waste.
• Return the tool to a recycling centre.
The plastic and metal parts used can
be separated and sorted for recycling.
Ask our service centre for details.
• To dispose of the packaging, place the
box with waste paper. Dispose of plas-
tic parts in the dual system.
• We will dispose of your defective
equipment sent in, free of charge.

Technical specifications

Electric Garden Hoe ............... EGT 1440
Motor power input ......................... 1400 W
Mains voltage ............. 230-240 V~, 50 Hz
Idling speed (n ) ................ 280 min
0
Safety class .........................................
Degree of protection
Max. working width ...................... 400 mm
Number of tine wheels ............................ 6
Max working depth ...................... 220 mm
Weight ...........................................11.8 kg
Sound pressure level
(L ) ........................... 71.3 dB(A), K
pA
Sound power level (L
Measured ..... 91.71 dB(A ); K
Guaranteed ................................ 93 dB(A)
Vibration on the grip (a
on the right .....1.130 m/s
on the left .......1.187 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations named in the declaration of
conformity.
Technical and optical alterations may be
made without notice for the purposes of
improvement. No guarantee can be given
for the accuracy of dimensions, notices
and specifications stated in this manual.
The manufacturer shall therefore not ac-
cept liability for statutory claims arising
from the manual.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
UK
(rpm)
-1
..........................IPX4
= 3 dB
pA
)
WA
= 1.5 dB
WA
)
h
, K = 1.5 m/s²
2
, K = 1.5 m/s²
2
II
77