Table of Contents
Advertisement
DIAGNOSTICS PAGE
These pages are intended to be used by EMS Factory trained technicians and detailed explanation of their use is not in the scope of
this manual.
Touching the Controls button for control page requires
the tech password.
WARNING: pre-set returns all selections to default. Do
not use unless instructed by EMS service engineer.
Touch the Relays button in the sub menu for conditions
of the relays to be checked, relay # is de-energized if
gray energized if green.
Touch the Digital in the sub menu button, or the right
arrow for checking input conditions. Inputs are gray if
NO input, RED if input is active.
23
Advertisement
Table of Contents
