Table of Contents
Advertisement
3-3. Installation
• Leave enough space around the unit to allow for an installation/uninstallation of the cover.
• Screw down the cover with M4 screws as shown in the figure below.
Be sure to fix the four corners to prevent it from falling.
• Install on the control panel with an effective depth of at least 105mm (4-
Properly install the unit on a stable, load-bearing surface.
Unit installed on an unstable surface may fall and cause injury.
13
20(
/
)
16
* Refer to section
1
Specifications
/
in).
3
16
for the product dimensions and weight.
To reduce the risk of wire shorting, fire, electric shock,
and malfunction, do not install the unit in a condensing
environment, and keep the unit out of water and other
sources of water.
- 11 -
13
20(
/
)
16
Unit: mm (in)
Hide quick links:
Advertisement
Table of Contents
