Table of Contents
Advertisement
3. Specification
Fully IEEE 802.15.4 compliant (ZigBee Pro)
Utilizes 2.4GHz ISM band; up to 16 channels
Power supply: 100~240VAC, 50/60Hz
Power consumption: 18mA/230VAC, 1.2W
<
Basic accuracy:
Measuring Range: 7 single CTs; 60A x 1/ 30A x 6
Transmission range: Up to 280 meters
Easy installation and configuration
4. Installation
This device is NOT truly waterproof/ resistant and is for indoor use.
This equipment must only be installed and serviced by qualified electrical personnel.
Turn off all power supplying equipment before working on or inside the equipment.
Always use a properly rated voltage sensing device to confirm power is off.
Beware of potential hazards, wear personal protective equipment, and carefully inspect the work area for
tools and objects that may have been left inside the equipment.
Install the power line (live wire) which you would like to measure with the Primary side. Next, connect the
Secondary side to Z821 (k to k; l to l).
±1%
4
Advertisement
Table of Contents
