Cleaning & Maintenance; Specifications - Pro-Elec PEL00310 Manual

Note: For the remote control, only use the batteries recommended (2 x AAA, not
provided}. When inserting the batteries, ensure that they are inserted correctly,
observing the plus and minus marks on both the batteries and the compartment.
CLEANING & MAINTENANCE
IMPORTANT: Unplug or disconnect the air cooler from the power supply before
servicing or cleaning.
Body: Clean the body of the appliance with a soft cloth. If the dust is difficult to
remove, wipe it with a damp cloth. Do not use chemicals, abrasives or solvents that
may damage the air cooler.
Curtain: Clean the curtain with clean water.
Water: The water should be changed every two days for hygiene reasons.
If the product is not going to be used for a long period of time the water should be
removed from the tray. The tray and fan should be dried thoroughly before storing.
The appliance must be cleaned before use.
CAUTION: Disregarding the cleaning instructions can cause danger to hygiene.

SPECIFICATIONS

Rated Voltage
Rated Input Power
Power - Standby Mode (PSB)
Maximum Fan Flow Rate (F)
Service Value
Seasonal Electricity Consumption (Q)
Fan Sound Power Level (LWA)
Maximum Air Velocity (c)
-
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste
Electrical & Electronic Equipment (WEEE). Any WEEE marked products
must not be mixed with general household waste, but kept separate for the
(€
treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
220-240V - 50Hz
70W
0.45W
15.5m /min
3
0.23(m /min)/W
3
21.9kWh/a
63.1dB(A)
3.15m/sec
4
Made in China. PR2 9PP
Man Rev 1.2