Advertisement

PORTABLE AIR CONDITIONER
Model: PEL00461
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PEL00461 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pro-Elec PEL00461

  • Page 1 PORTABLE AIR CONDITIONER Model: PEL00461...
  • Page 2: Table Of Contents

    CONTENTS Page No. Details Important Safety Information Introduction Positioning Installation Control Panel Remote Control Operation Modes Water Drainage Maintenance Troubleshooting Cleaning...
  • Page 3: Important Safety Information

    IMPORTANT SAFETY INFORMATION Please read these instructions carefully before use and retain for future reference. • When using electrical appliances basic safety precautions should always be followed. • Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
  • Page 4: Introduction

    INTRODUCTION Front Back 1 Control panel Filter frame upper 2 Air-outlet Exhaust connector 3 Power button Filter frame lower 4 Handle Rubber plug 5 Castor 10 Plug cap 11 Power cord Accessories 12 Exhaust hose 13 Adjustable window guide 14 Exhaust hose adapter 15 Remote control POSITIONING •...
  • Page 5: Control Panel

    Installation Errors • In order to operate efficiently, the air must be able to flow freely in the exhaust pipe. • Avoid any sharp bends in the exhaust pipe (Fig.3). • Keep it as level as possible. • Keep its length as short as possible. The maximum extension length of the exhaust pipe is 1.5m.
  • Page 6: Remote Control

    REMOTE CONTROL Mode Down Sleep Timer Swing Power OPERATION MODES Cooling Mode • After the air conditioner turns on, the default setting is cooling mode with a temperature of 22°C and low fan speed. Press MODE to select cooling mode and the cooling mode indicator turns on. •...
  • Page 7: Water Drainage

    WATER DRAINAGE The air conditioner has an internal water tank to collect water that condenses during the cooling process. This tank will need to be emptied periodically. When the internal water tank is full, the WATER FULL indicator will flash on the screen and a buzzer will sound.
  • Page 8: Troubleshooting

    TROUBLESHOOTING Trouble Cause Solution • Power off. • Power on. Machine does • Water-full indicator is on. • Drain internal water tank. not work. • Timer function is active. • Deactivate TIMER function. • The unit is in direct sunlight. •...

Table of Contents