Voice Announcement; Site Selectable Alerts (Astro 25 Trunking); Sending Ssa Notification To Single Site - Motorola APX900 2 User Manual

MN003110A01-AJ
Chapter 6: Advanced Features
NOTICE: The radio cannot be used while the upgrade is being installed. Therefore, make
sure to only accept the upgrade at a convenient time when immediate radio use is not
required.
• If you choose to delay, a configuration data upgrade is installed automatically at the next power up.
However, in the case of a firmware upgrade, the radio prompts Upgrade? again at the next power
up.
• If you choose to reject, the display shows Upg Aborted. The radio continues to function with the
current configuration until it gets reprogrammed.
NOTICE: If your radio has problems upgrading over-the-air, consult a qualified technician for
details.
6.22

Voice Announcement

This feature enables the radio to audibly indicate the current feature mode, zone, or channel assigned
to the user.
The available voice announcement priority options are:
High
Voice announcement is enabled even when the radio is receiving calls.
Low
Voice announcement is disabled when the radio is receiving calls.
6.23

Site Selectable Alerts (ASTRO 25 Trunking)

A Site Selectable Alert (SSA) is an Intelligent Lighting indicator with audio alert sent to radios at sites to
notify the users when there is a special situation that they need to be aware of.
Your radio supports up to 250 site aliases. Only authorized radios are enabled to send SSA.
NOTICE:
The alert alias, alert tone, and alert period is configured in the Customer Programming
Software. Contact your system administrator for more information.
When mixing SSA with received voice audio, the SSA alert is reduced in volume to ensure that
the voice message is still heard clearly. It is important that the SSA audio files are created with
clear loud audio to ensure audio clarity at reduced levels.
6.23.1

Sending SSA Notification to Single Site

Procedure:
1 or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Start Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to the desired Site Alias. Press the Menu Select button directly below Sel.
The display shows the Select Alert screen.
92