PC PLUS ADAPTER DUAL SERIAL PCI
5.2 Windows NT 4.0 Installation
Make sure that you are installing the correct Adapter PCI
drivers for the appropriate operating system. DO NOT
install Windows 95/98/Me/2000/XP drivers under Windows
NT.
5.2.1 D
I
RIVER
1. Once the Adapter is installed in your PC, turn
on your computer and start NT.
2. Place the Adapter installation diskette into your
floppy drive and select Run from the Start Menu.
When prompted, type: A:\NT4.0\Setup.
3. After the necessary files have been copied, select
My Computer and start Control Panel. A new icon
will appear called "Adapter." This applet should
now be used to configure ALL Com Ports in your
PC—not just PC Plus Adapter Serial PCI ports.
26
NSTALLATION
NOTE