Table of Contents
Advertisement
You MUST set up the operating system BEFORE you physically install
the card.
4.1 Setting Up the Operating System
If you are installing the PCI adapter in DOS, OS/2
appropriate directory on the Serial Utilities CD-ROM for instructions.
4.1.1 W
3.1
INDOWS
Refer to the Win3x.hlp file in the \Win31 directory on the included CD-ROM.
4.1.2 W
95/98 U
INDOWS
If you are installing the PCI card in Windows
before installing the card. Power down the computer and install the adapter. The
resources are automatically configured for the PCI card. Refer to the appropriate
help file in the Black Box folder located in the Start, Programs menu for changing
those resources.
4.1.3 W
NT
INDOWS
If you are installing a PCI card in Windows NT
CD-ROM before installing the card. After the software installation is complete,
power down the computer, install the card, then power up. Since resource
allocation is automatic, the installation is now complete.
4.1.4 DOS
Refer to the Readme.txt file found in the \DOS directory on the serial utilities
CD-ROM.
4.1.5 O
O
THER
PERATING
Refer to the appropriate directory on the serial utilities CD-ROM.
4. Installation
IMPORTANT
X
SERS
S
YSTEMS
CHAPTER 4: Installation
®
, or QNX, please refer to the
95/98, run setup on the CD-ROM
®
®
, run setup on the serial utilities
11
Advertisement
Table of Contents
