Table of Contents
Advertisement
5. Software Installation
5.1 Windows 95/98/Me/2000/XP Installation
Make sure that you are installing the correct Adapter drivers
for the appropriate operating system. DO NOT install NT
drivers under Windows 95/98/Me/2000/XP.
5.1.1 W
INDOWS
1. Once the Adapter is installed in your PC, turn
on your computer. Windows will automatically
detect the Adapter as a new PCI Serial Controller
and ask you to insert the Installation diskette.
Insert the diskette as prompted.
2. After the necessary files have been copied,
Windows will complete the full installation of the
Adapter. During this process, a Parent will be
created in Device Manager, and two child ports
will be created in Device Manager/Ports. The
following describes how you may custom configure
these ports for your personal needs.
3. Click on the Start button, then choose Settings,
Control Panel, System, Device Manager. You
should see a window that is similar to the one
shown in Figure 5-1.
NOTE
95 D
I
RIVER
NSTALLATION
CHAPTER 5: Software Installation
11
Advertisement
Table of Contents
