Connecting A Camcorder - Samsung FP-T5094W Owner's Instructions Manual

S-Video Connection
Your Samsung Wireless Home AV Center can be connected to the S-Video jack of a VCR.
(This connection delivers a better picture when compared to the regular Video connection above.)
1
To begin, follow steps 1–3
in the previous section to
connect the antenna or
cable to your VCR and your
Wireless Home AV Center.
2 Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the AV
IN 2 [S-VIDEO] jack on the
Wireless Home AV Center.
3 Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN 2 [R-AUDIO-L] jacks
on the Wireless Home AV
Center.

Connecting a Camcorder

The front panel jacks on your Wireless Home AV Center make it easy to connect a camcorder.
They allow you to view the camcorder tapes without using a VCR.
1 Connect a Video Cable
(or S-Video Cable) between
the AV IN 2 [VIDEO]
(or S-VIDEO) jack on the
Wireless Home AV Center
and the VIDEO OUT jack on
the Camcorder.
2 Connect Audio Cables
between the AV IN 2
[L-AUDIO-R] jacks on the
Wireless Home AV Center
and the AUDIO OUT jacks on
the Camcorder.
VCR Rear Panel
An S-Video cable may be included with your VCR. (If not, check your local electronics
store.)
➢ Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
➢
Camcorder
or
➢ Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
➢
English - 16
Audio Cable (Not supplied)
3
2 S-Video Cable(Not supplied)
1 Antenna cable(Not supplied)
Front Panel of Wireless
2
Audio Cable (Not supplied)
1 Video Cable (Not supplied)
S-Video Cable(Not supplied)
1
Wireless Home AV Center
(Front and Rear Panel)
Home AV Center