Connecting A Dvd Player/Cable Box/Satellite Receiver (Set-Top Box); Connecting A Vcr - Samsung FP-T5094W Owner's Instructions Manual

Connecting a DVD Player/Cable Box/Satellite receiver (Set-Top Box)

The rear panel jacks on your Wireless Home AV Center make it easy to connect a DVD Player/Cable Box/ Satellite
receiver (Set-Top Box).
1 Connect Component Cables
between the COMPONENT
IN (1 or 2) [Y, P , P ] jacks on
B R
the Wireless Home AV Center
and the COMPONENT OUT
[Y, P , P ] jacks on the DVD
B R
Player/Cable Box/Satellite
receiver (Set-Top Box).
2 Connect Audio Cables
between the COMPONENT
IN (1 or 2) [R-AUDIO-L] jacks
on the Wireless Home AV
Center and the AUDIO OUT
jacks on the DVD Player/
Cable Box/Satellite receiver
(Set-Top Box)

Connecting a VCR

Video Connection
These instructions assume that you have already connected your Wireless Home AV Center to an antenna or a cable
system (according to the instructions on pages 12~13). Skip step 1 if you have not yet connected to an antenna or a
cable system.
1 Unplug the cable or antenna
from the back of the Wireless
Home AV Center.
2 Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3 Connect an Antenna Cable
between the ANT OUT
terminal on the VCR and
the ANT 1 IN(AIR) or ANT 2
IN (CABLE) terminal on the
Wireless Home AV Center.
4 Connect a Video Cable
between the VIDEO OUT
jack on the VCR and the AV
IN 1 [VIDEO] jack on the
Wireless Home AV Center.
5 Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN 1 [R-AUDIO-L] jacks
on the Wireless Home AV
Center.
If you have a "mono"
➢
(non-stereo) VCR, use a Y-
connector (not supplied) to
DVD Player/Cable Box/
Satellite receiver (Set-Top Box)
➢ Component video separates the video into Y (Luminance (brightness)), P
(Blue) and P (Red) for enhanced video quality. Be sure to match the component
R
video and audio connections. For example, if connecting the video cable to
COMPONENT IN, connect the audio cable to COMPONENT IN also.
➢ Each DVD Player/Cable Box/Satellite receiver (Set-Top Box) has a different back
panel configuration.
➢ When connecting a DVD Player/Cable Box/Satellite receiver (Set-Top Box), match
the color of the connection terminal to the cable.
VCR Rear Panel
2
hook up to the right and left audio input jacks of the Wireless Home AV Center.
If your VCR is stereo, you must connect two cables.
➢ Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
➢
English - 15
Rear Panel of Wireless Home AV Center
1 Component Cable (Not supplied)
2 Audio Cable (Not supplied)
Rear Panel of Wireless Home AV Center
5 Audio Cable(Not supplied)
4 Video Cable(Not supplied)
3 Antenna cable(Not supplied)
B
Continued...