Connecting To A Camcorder; Connecting A Dvd Player - Samsung SyncMaster P50FP User Manual

Connecting to a Camcorder

1. Locate the AV output jacks on the camcorder. They are usually found on the side or back
of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on
the camcorder and the AV/COMPONENT AUDIO IN [L-AUDIO-R] on the PDP Display.
2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV
IN [VIDEO] on the PDP Display.
3. Select AV for the Camcorder connection using the Source button on the front of the PDP
Display or on the remote control.
4. Then, start the Camcorders with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.

Connecting a DVD Player

1. Connect a set of audio cables between the AV/COMPONENT AUDIO IN [L-AUDIO-R]
on the PDP Display and the AUDIO OUT jacks on the DVD player.
2. Connect a Component cable between the BNC / COMPONENT IN -
the PDP Display and the
Connections
P , Y, P
jacks on the DVD player.
R B
P , Y, P
port on
R B