Connecting to Y, P
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
2
➢
Component video separates the video into Y (Luminance (brightness)), P
sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN,
connect the audio cable to COMPONENT IN also.
➢
Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
➢
When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the
cable.
Connecting a Camcorder
Camcorder
➢
Each Camcorder has a different back panel configuration.
➢
When connecting a Camcorder, match the color of the connection terminal to the cable.
, P
B
R
TV Rear Panel
Audio Cable (Not supplied)
Component Cable (Not supplied)
S-Video Cable(Not supplied)
or
Video Cable (Not supplied)
Audio Cable (Not supplied)
2
(Blue) and P
B
TV Side Panel
English - 4
1
Connect a Component Cable
between the COMPONENT IN (1 or
2) [Y, P
, P
] jacks on the TV and
B
R
the COMPONENT [Y, P
on the DVD Player or Cable Box /
Satellite receiver(Set-Top Box).
2
Connect Audio Cables between
the COMPONENT IN (1 or 2) [R-
AUDIO-L] jacks on the TV and the
AUDIO OUT jacks on the DVD
Player or Cable Box / Satellite
receiver (Set-Top Box).
3
Press the SOURCE button on the
remote control until you see the
Set-Top/Cable Box signal (see
"Viewing an External Signal Source"
on page ).
(Red) for enhanced video quality. Be
R
1
Locate the A/V output jacks on the
camcorder.
2
Connect a Video Cable (or S-
Video Cable) between the AV IN 2
[VIDEO] (or S-VIDEO) jack on the
TV and the VIDEO OUT jack on the
Camcorder.
3
Connect Audio Cables between the
AV IN 2 [L-AUDIO-R] jacks on the
TV and the AUDIO OUT jacks on
the Camcorder.
4
Press the SOURCE button on the
remote control until you see the
Camcorder signal (see "Viewing an
External Signal Source" on page
).
, P
] jacks
B
R