AMETEK/PRESTOLITE POWER EVOLUTION Owner's Manual page 31

Programming Settings
Equalize Mode
Equalize Type
Off–
Cycle–
Day of Week– Equalize will occur on a specific
BID Cycles–
Manual–
Weekly Limit
This is the programmed value for total equalize cycles a
charger will do in one weeks time. Default is off.
November 23, 2020
no Equalize cycles
Equalize will occur after the
charger completes the
programmed number of cycles
in the "Charge Cycles" box.
day of the week. That day is
programmed in the Day of
Week box.
Equalize will occur when a
specific battery has completed
a programed number of charge
cycles in the "BID Cycles" box.
Equalize will only occur when
the equalize toggle is switched
on during a charge cycle.
Refresh
Refresh- Select to enable a refresh charge.
Default Off.
Time- The number of hours before the
charger starts a refresh charge,
provided the battery has not been
disconnected (00 to 99 hours).
▪VPC- The volt per cell level before the
charger automatically starts a refresh
charge, provided the battery has not
been disconnected (1.50 to 2.20).
There is a 5 hour minimum time between refresh charge
cycles.
Note: Refresh will occur when one of the two parame-
ters are met.
193111-200
PROGRAMMING SETTINGS
9-4