Table of Contents
Advertisement
Programming Settings
Time/Date
Time/Date– This is the screen that the controls time
and date is programmed. The clock is a 24 hour clock.
Press the Save Date button to save these settings.
Screen Calibration– Calibrate the touch screen display
by pressing the screen where the little + symbols ap-
pear.
November 23, 2020
Start Mode
The start mode can be set to:
1. Auto–
Charge cycles begins when battery is
detected
2. TODS–
Time of Day Start can start the charge
cycle at a desired time every day.
3. Delay–
Delays the start of a charge cycle for
the programmed hours.
4. TODB–
Time of Day Blockout can prevent
charging during a specified time period.
5. Timer Mode– The charger will prompt the user
to input the desired charge time.
Override– This toggle switch can enable a manual
override if the start mode is set to anything but Auto.
193111-200
PROGRAMMING SETTINGS
9-2
Advertisement
Table of Contents
Need help?
Do you have a question about the EVOLUTION and is the answer not in the manual?