Table of Contents
Advertisement
Replacement of Soldering Iron's Tip and Soldering Iron Heating Core's Element
1) Unscrew the nut (No 1) and remove the steel tube (No 2) to remove the tip which has to be re-
placed.
2) For the replacement of the heating core's element you need to unscrew the plastic cap (No 4). Pull
out the heating core (No 6) gently along with the circuit board (No 7). Please carefully remember
the connection of the grounding spring (No 5).
3) The iron core must be welded off and replaced by the new heating core which can be fitted well
and easily. Please remember or note down the previous iron core connection.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Seite 18
Advertisement
Table of Contents
