Safety Rules - WilTec 61538 Operation Manual

Anti-static soldering station
Hide thumbs Also See for 61538:
Table of Contents

Advertisement

Make sure that the electrical plug connections are located in a flood-proof area or are protected
from moisture.
Disconnect the mains plug before carrying out any work on the appliance.
Avoid exposing the device to a direct jet of water.
The operator is responsible for compliance with local safety and installation regulations. (Ask a
qualified electrician if necessary)
If the device should fail, repair work may only be carried out by a qualified electrician or by WilTec
customer service.
WARNING:
Read all safety instructions and instructions. Failure to follow the safety precautions and instruc-
tions may result in electric shock, fire and/or serious injury.
Keep all safety information and instructions for the future.
Electrical connection
The electrical connection is made at a 230 V ~ 50 Hz socket outlet with grounding contact.
Fuse protection at least 10 Ampere.
Commissioning
Place the unit on a level, stable surface with a temperature not higher than 40°C. Position the
unit in a horizontal position so that the station can operate correctly.
Connect it to the power supply.

Safety Rules

Using the machine the following basic measures should followed to avoid electric shock or injuries or
damages caused by a fire.
1) To ensure personal safety, please turn off the main power switch after you completed your work.
Always unplug the power cord, when the machine is not in use for a longer time.
2) You must use originally approved and recommended parts. Otherwise this will lead to conse-
quences and the warranty will void.
3) Machine failures must only be repaired by the manufacturer or an authorized service partner. Do
not repair the product on your own.
4) This product is grounded by a three-wire plug. It must always be plugged into a fitting socket that
is grounded as well. The plug must never be changed in any kind or used with a socket without
grounding.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Seite 14

Advertisement

Table of Contents
loading

Table of Contents