Rockwell Automation Allen-Bradley Photoswitch Bulletin 45FVL Series Installation Instructions

PHOTOSWITCHr Bulletin 45FVL Digital Self Teaching Fiber Optic
Product Description
The 45FVL is a DIN rail mountable fiber optic photoelectric
sensor with sophisticated detection, diagnostic and self-teach
capabilities. Possible modes of sensing include transmitted
beam, diffuse and retroreflective, allowing the 45FVL to be
used in a variety of complex applications.
Summary of 45FVL Features
S
Self-teach capability—Allows the 45FVL photoelectric
sensor to determine an optimum sensitivity and hysteresis
setting for a specific application.
S
Manual or automatic sensitivity adjustment.
S
Back-Lit LCD Display. Clearly displays various operating
modes, functions and diagnostic information.
S
Visible red, green, white, or blue light source.
S
Selectable 40ms off delay output timer. "Pulse stretcher"
useful in high speed applications when the output pulse
must be lengthened to allow time for the machine logic to
respond.
S
DIN rail mountable. For installation convenience, a steel
bracket is supplied for specific mounting requirements.
S
"Power Bus" option. Interface which allows user to
jumper power on several DIN rail mounted units to reduce
unnecessary wiring.
S
Dual channel interference protection. Prevents crosstalk
between 2 sensors.
S
Short circuit protection.
S
Reverse polarity protection.
S
False pulse protection.
S
Transient noise protection.
The 45FVL photoelectric sensors are designed for use with
plastic fiber optic cables up to 2.2mm diameter. An adaptor is
supplied with the sensor for use with 1.25mm diameter plastic
fiber optic cables. No tools are required to attach or remove
fiber optic cables. Special glass fiber optic cables are also
available.
Accessories
S
Mounting Bracket : Quantity 1
S
Instruction Manual : Quantity 1
S
Fiber Adaptor : Quantity 1
Installation Instructions
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
General Specifications
User Interface
The user interface contains a back lit LCD display, two
adjustment buttons, operation selector switch, and LED
indicators for configuring and viewing the sensor's operation
and status. A more complete description of each item is
described below.
NPN Type 45FVL-2LG
Model Model
PNP Type
45FVL-2LH
Light Source Red LED
(Wave Length) (660nm)
Power Supply 12 to 24V DC +/- 10% Ripple 10% or Less
Range Depends on Fiber
Current Consumption NPN Type: <39ma/PNP Type: <50ma
Output Mode Open Collector
NPN Rated: 100ma @ 30V DC Max, <1V Residual
PNP Rated: 100ma @ 30V DC Max, <2V Residual
Operation Mode Light On/Dark On Selectable
Output Timer Off delay/Nondelay Selectable
Delay time: 40ms fixed
Indicators Orange LED = Output, Green LED = Power/Stability
Response Time Channel 1 = 600µs, Channel 2 = 700µs
Interference Protection Yes
Short Circuit Yes
Protection
Features Power bus for easy wireless power distribution
Material Polycarbonate
Wiring Cable 2m (6.5ft) or 4 pin pico QD connector or Power
Bus QD connector
Operating -25_C to +55_C (-13_F to 131_F)
Temperature
Operating Humidity 35% to 85% RH
Operating NEMA 1, IP 40
Environment
Vibration 10-55Hz
Shock 50g
Approvals CE
Sensitivity Level (1, 2, ...8)
Stability Indicator
Incoming Light Level
(Green LED)
Output Indicator
Operating Modes
(Orange LED)
L: Light On
D: Dark On
F: Off Delay
45FVL-3LG 45FVL-6LG 45FVL-5LG
45FVL-3LH 45FVL-6LH 45FVL-5LH
Green Blue LED White LED
LED
(565nm) (470nm)
Push Buttons
-
+
SET
RUN
Operation Selector Switch
Functions
L: Locked Mode
S: Sensitivity Adjustment Status
T: Teach Mode