Electromagnetic Compatibility - Cardinal Health PRO Patient User Manual

6.1 Electromagnetic Compatibility

Guidance and Manufacturer's Declaration: Electromagnetic Emissions (IEC 60601-1-2)
Emissions Test
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
RF emissions
CISPR 14-1
Recommended separation distance between portable and
mobile RF communications equipment and the PRO.
The PRO is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the PRO can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the PRO as recommended below, according to the
maximum output power of the communications equipment.
Output Power of
Transmitter in watt(s)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
Note: At 80MHz and 800MHz, the separation distance for the higher frequency range applies.
Note: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Compliance
Class A
Complies
Complies
Separation distance according to frequency of transmitter in meter(s)
150kHz to 80MHz
0.12
0.38
1.2
3.8
12
Electromagnetic Environment
The PRO is suitable for use in all establishments, including medical
facilities, domestic establishments and those directly connected to the
public low-voltage power supply network that supplies buildings used for
domestic purposes.
The PRO is not suitable for interconnection with other equipment.
80MHz to 800MHz
0.12
0.38
1.2
3.8
12
800MHz to 2.5GHz
0.23
0.73
2.3
7.3
23
26