Smartwares HA788GSM User Manual page 14

Get (Note 2)
91
Zone 1 Name (Note5)
Use result from
Zone1 Name:
Change Get command, do
Entrance Door
Zone 1 Name SMS Forward->
Sensor1
Edit->Send back
Get (Note 2)
92
Zone 2 Name (Note5)
Use result from
Zone2 Name:
Change Get command, do
Entrance Door
Zone 2 Name SMS Forward->
Sensor2
Edit->Send back
...same for Zone Names 3 ~ 9
Get (Note 2)
10
RFID Tag Names (Note5)
Tag Names:
Use result from
1. Jack
Change RFID Get command, do
2. Daniel
Tag Names SMS Forward->
3. Henry
Edit->Send back
4. Joe
Get
Entry Delay & 11 (Note 5)
Exit Delay Time
Entry & Exit Delay Use result from
Set
Time Get command, do
Entry Delay &
(0-240 sec.): SMS Forward->
Exit Delay Time
10 Edit->Send back
Zone1 Name:
Zone1
Set Zone Name Successfully
Zone2 Name:
Zone2
Set Zone Name Successfully
Tag Names:
1.
2.
3.
4.
Set Tag Names Successfully
Entry & Exit Delay Time(0-240 sec.):
15
Set Delay Time Successfully
Get
12 (Note 5)
Siren Volume
Use result from
Siren Volume (0 Get command, do
Set
Mute, 1 Low, 2 High): SMS Forward->
Siren Volume
1 Edit->Send back
Get
Siren Alarm 13 (Note 5)
Duration
Use result from
Set Siren ringing time Get command, do
Siren Alarm (1-9 minutes): SMS Forward->
Duration 5 Edit->Send back
Note1: Maximum length for telephone numbers is 20 digits. Only numbers 0 – 9 and
"," can be used. For example, phone number 0222606868 with extensions
1234 will be input as: "0222606868,1,2,3,4". If the length exceeds 20 digits,
only the first 20 digits will be saved while the rest will be deleted.
Note 2: Maximum length for Zone Names and Tag Names is 24 characters
(alphanumeric characters only). If the length exceeds 24 characters, only the
first 24 characters will be saved while the rest will be deleted.
Note 4: Do NOT add or delete spaces or other symbols, or change Title content, as
SMS configuration may fail if those are changed. For example, when setting
Zone1 Name, the zone name must be entered under Title (not after). Please
refer to the examples listed above.
Note 5: Only the host mobile phone number can use this SMS function.
Note 6:Two Way Talk and Listen In must be picked up within 25 seconds, or the host
will end the call. A failure SMS will be sent if call back is unsuccessful.
Note 7: Send an SMS with content "???" from a host phone number to receive the
alarm panel model number and its software version.
Siren Volume (0 Mute, 1 Low, 2 High): 2
Set Siren Volume Successfully
Siren ringing time (1-9 minutes):
3
Set Siren Time Successfully