Samsung SCH-a870 Series User Manual page 118

If you need to re-record, say "No."
If you say "No," the phone prompts you to pronounce the digits again. Wait
for the beep and then say the digits.
Repeat this step until you're satisfied with the recording.
After confirming that the recording sounds "ok", continue the recording
4.
process with the next set of digits.
After six sets of digits, the phone asks whether you want to do more
5.
adaptation. Answer "Yes."
Repeat steps 4 and 5 for another six sets of digits. After the second group
6.
of six sets of digits, "Adaptation complete" plays through the speaker
and you are returned to the Adapt Digits menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
In standby mode, press the MENU key (
1.
Tools), and
for Digit Dialing. The following options appear in the display:
Adapt Digits
Reset Digits
Use the navigation keys to highlight Reset Digits, then press the
2.
The phone prompts you to confirm digit rest.
Press the OK (left) soft key (
3.
the Back (right) soft key (
Press the
4.
Sound
Sound lets you specify what (if any) text prompts you want your phone to read to you
through the earpiece.
In standby mode, press the MENU key (
1.
Tools), and
for Sound. The following options appear in the display:
Prompts — Enables (On) or disables (Off) audio prompts.
Digits — Enables (On) or disables (Off) audio digit playback.
Names — Enables (On) or disables (Off) audio name playback.
Name Settings — Lets you adjust the speed and volume of your phone's audio
name playback.
Use the navigation keys to highlight the desired setting.
2.
Press the
3.
118
(for Voice Service),
@
)
)
) to reset your digit adaptation, or press
) to cancel.
key to reset digit dialing and exit.
(for Voice Service),
@
)
)
key to accept the new setting.
), then press (for
(for Voice Settings), and
), then press (for
(for Voice Settings), and
key.