Page 1 Siren Series P O R T A B L E T R I - M O D E M O B I L E P H O N E User Guide Please read this manual before operating your phone, and keep it for future reference.
Page 2: Intellectual Property
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state...
Page 3: Disclaimer Of Warranties; Exclusion Of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE;...
Page 4: Table Of Contents
Table of Contents Getting Started ...7 Understanding this User Manual ...8 Charging the Battery ...8 Activating Your Phone ...9 Setting Up Your Voicemail ...11 Understanding Your Phone ...12 Features of Your Phone ...12 Closed View of Your Phone ...13 Open View of Your Phone ...14 Command Keys ...16 Understanding the Display Screen ...18 Your Phone’s Modes ...19...
Page 5 Cricket Clicks ... 66 Accessing Cricket Clicks ...67 Messaging ... 69 Types of Messages ...70 Create and Send Text Messages ...70 Receive Text Messages ...71 Send Picture Messages in Camera Mode ...71 Send Picture Messages in Standby Mode ...73 Receive Picture Messages ...75 Message Boxes ...76 Erase Messages ...82 Message Settings ...82...
Page 6 Phone Settings ...130 Memory Info ...137 Phone Info ...137 Health and Safety Information ...139 Health and Safety Information ...140 Samsung Mobile Products and Recycling ...141 UL Certified Travel Adapter ...141 Consumer Information on Wireless Phones ...141 Road Safety ...147 Operating Environment ...149 Using Your Phone Near Other Electronic Devices ...149...
Page 7: Section 1: Getting Started
Section 1: Getting Started Topics Covered • Understanding this User Manual • Charging the Battery • Activating Your Phone • Setting Up Your Voicemail This section explains how to start using your Siren phone by activating your service, setting up your Voicemail, or getting an understanding of how this manual is put together.
Page 8: Understanding This User Manual
Charging the Battery Your phone is powered by a rechargeable standard Li-Ion battery. Only use Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life. Use of other accessories may invalidate your warranty and may cause damage.
Page 9: Low Battery Indicator
Insert the smaller end of the Travel Adapter into the charger/accessory connector at the bottom end of your phone. Important!: You must unplug the adapter before removing the battery from the phone during charging to avoid damage. Low battery indicator The battery indicator ( ) in the upper-right corner of the display indicates power level.
Page 10: Remove The Battery
Press lightly on the bottom end of the battery down into the phone until it slips into place. Place the battery cover over the battery and slide the battery cover into place. Remove the Battery Press and hold the Press down on the battery cover release latch (1) and slide the cover (2) toward the bottom end of the phone.
Page 11: Turn Your Phone On
Turn Your Phone On Open the folder on your phone, as shown. Press the key. Note: As with any other radio-transmitting device, do not touch the antenna while using your phone as this can affect call quality and can cause the phone to operate at a higher power level than is necessary.
Page 12: Section 2: Understanding Your Phone
Section 2: Understanding Your Phone Topics Covered • Features of Your Phone • Closed View of Your Phone • Open View of Your Phone • Command Keys • Understanding the Display Screen • Your Phone’s Modes This section outlines some key features of your phone. It also describes the screen format and the icons that will be displayed when the phone is in use.
Page 13: Closed View Of Your Phone
Closed View of Your Phone 1. Headset Jack 2. Camera Lens 3. Volume Keys 4. Front Display Features Headset Jack — Lets you plug in an optional headset for safe, convenient, hands-free conversations. Camera Lens — The lens of your built-in camera. Volume Key —...
Page 14: Open View Of Your Phone
Open View of Your Phone 1. Receiver 2. Main Display 3. Navigation Key 4. Left Soft Key 5. Volume Keys 6. Send Key 7. Clear Key 8. Special Function Keys Features Receiver — Lets you hear the other caller. Main Display — Indicates the status of your phone, including numbers dialed, feature and function screens, status icons, message indicators, signal strength, and so on.
Page 15 Navigation Key — In Menu mode, lets you scroll through the phone menu options. In Standby mode, lets you access preset functions and one user- defined function. Left Soft Key — Used to navigate through menus and applications and to select the choice indicated at the bottom left corner of the Main LCD.
Page 16: Command Keys
Command Keys Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the (left) soft key Left Soft Key Some functions of the left soft key are as follows. In standby mode, press the Settings (left) soft key ( •...
Page 17: Speakerphone Key
End Key Press and hold the End key Briefly press Press to return to standby mode from any menu, or to cancel the last input. Send Key The Send key is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed.
Page 18: Understanding The Display Screen
Understanding the Display Screen The top line of your phone’s display contains icons that indicate network status, battery power, signal strength, connection type, and more. The following list contains icons that may appear in your display. Display Screen Icons Your Siren phone can show you definitions of the icons that appear on the top lines of the front and main displays.
Page 19: External Display
Backlights Backlights illuminate the internal and external displays and the keypad. When you press any key or open the phone, the backlights come on. They go off when no keys are pressed within a period of time set in the Backlight menu. Note: During a phone call, the display backlights dim and turn off after 10 seconds to conserve battery power, regardless of the Backlight setting.
Page 20: Lock Mode
Tip: You can also cycle between T9 Word, Abc, and 123 by repeatedly pressing and holding the until the phone beeps Lock Mode When the phone is in Lock Mode, restrictions are placed on phone use. You can receive calls and messages, but cannot place outgoing calls (except for emergency numbers) until you unlock the phone.
Page 21: Vibrate Mode
While in Silent mode and standby mode, press and hold • briefly appears in the display and your phone returns to standby mode. Vibrate Mode In standby mode, repeatedly press the volume key ( ) down until Vibrate appears in the display. The volume key is on the upper left side of phone, near the (left) soft key Adjust the Ringer In standby mode, press the volume key ( ) on the left side of the phone up...
Page 22: Section 3: Call Functions
Section 3: Call Functions Topics Covered • Making a Call • Answering a Call • Recent Calls This section provides procedures for making and answering calls. This section also describes features, such as call logs and call timers, that help you make calls and manage your call time.
Page 23: Three-Way Calling
Making a Call With the phone on, enter the number you wish to call using the keypad. Press to place the call. Emergency Calls When you call an Emergency Number, such as 911, your Siren phone locks itself in emergency mode, only allowing you to make calls to the emergency call center you originally contacted.
Page 24: Speed Dialing
Press the key to enter the highlighted pause into the number sequence. Press to call the number. Tip: Press the Save (left) soft key ( frequently. Speed Dialing Speed Dialing lets you place a call to any Contact stored in your Contacts list by dialing the Contact’s Location number.
Page 25: Voice Dialing Tips
Example: To speed dial the Contacts entry assigned to Location 325, press and hold the key. Voice Dialing The voice recognition capabilities of your Siren are exceptional due to advanced, speaker-independent technology. This means you do not need to “train” your phone to understand your voice.
Page 26: Dialing A Number
Say “Yes” to confirm the name or “No” to hear the next name, or use the keypad to select the correct name from the list. (See See “Choice Lists” on page 90, for more information.) • Press the Repeat (right) soft key ( •...
Page 27: Answering A Call
Pause Dialing From a Contacts Entry If you voice dial a contact that contains 2-Sec Pause(s) simply wait for the pauses • to pass and the dialing to complete. If you voice dial a contact that contains Wait(s), wait for the appropriate prompt(s) •...
Page 28: Adjust The Ringer
Adjust the Ringer In standby mode, press the volume key ( ) on the left side of the phone up or down. Options are: • Ringer Off • Vibrate • Low • Low/Medium Press once you’re satisfied with the setting. The phone returns to standby mode.
Page 29: Call Block
Caller ID Caller ID lets you identify who is calling you by displaying a caller’s number. If the caller’s name and number are stored in Contacts, the caller’s name also appears. If you’ve assigned a picture to the entry, it appears in the display as well. Call Block You can prevent your number from displaying on another phone’s caller ID screen by enabling Call Block.
Page 30: Recent Calls
• Voice Memo — Allows you to record your side of the current conversation for up to one minute. Within the above menu list, do one of the following: • Use the navigation key to highlight a menu or feature. Press the the highlighted menu or to activate the highlighted feature.
Page 31: Incoming Calls
Incoming Calls The last 90 Incoming calls are stored in your phone’s Incoming call log. You can review the Incoming call log for time and date of the call, as well as other information. In standby mode, press the MENU key ( Calls) and for Incoming Calls.
Page 32: Erase Logs
Press the Options (right) soft key ( contains the following options: • Save — Save the number to your Contacts. • Details — Contacts calls only — Lets you view the Contacts entry for the originator of this call. • Erase — Erase the selected call from your Missed call list. •...
Page 33: Data Counter
To Erase all calls, press the Yes (left) soft key ( To keep the calls, press the No (right) soft key ( Call Timer View the duration of your last call, total calls, and calls made during the life of your phone using the Call timer feature.
Page 34: Store Numbers From Call Logs
• Transmit — Shows the amount of data (in kilobytes) that your phone has transmitted since last being reset. • Received — Shows the amount of data (in kilobytes) that your phone has received since last being reset. • Total — Shows the amount of data (in kilobytes) that your phone has transmitted and received since last being reset.
Page 35 Select Create New to add the number as a Contacts entry, or select Update Existing to find a Contact with which to associate the new number. Follow the prompts to store the number to Contacts. Recent Calls Call Functions...
Page 36: Section 4: Menu Navigation
Section 4: Menu Navigation Topics Covered • Menu Navigation • Menu Shortcuts • Navigation Key Shortcuts • Navigate Using a Shortcut • Menu Outline This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone.
Page 37: Return To The Previous Menu
Menu Navigation Access the menus and sub-menus in your phone using the navigation key ( and soft keys ( ), or use a shortcut. In standby mode press the MENU key ( appear in the display. Note: More than one menu may appear in your display. This setting can be modified in the Display/Menu Style menu.
Page 38: Navigate Using A Shortcut
Navigate Using a Shortcut You can also access menus and sub-menus using menu numbers. Enter the menu number after pressing the MENU key ( of your choice. Before you can navigate using a shortcut, you’ll need the menu or sub-menu number that you wish to access. Tip: Use the list of menus and sub-menus, which begins on page 38, to navigate using shortcuts.
Page 39 Erase Messages 2.6.1 Inbox 2.6.2 Outbox 2.6.3 Drafts 2.6.4 All Messages Msg Settings 2.7.1 Notification 2.7.2 Auto Save 2.7.3 Auto Erase 2.7.4 Auto View 2.7.5 Entry Mode 2.7.6 2.7.7 2.7.8 Signature 2.7.9 Preset Msgs 2.7.0 Auto Scroll Contacts Find Add New Entry Speed Dial Group 3.4.1...
Page 40 Browser Goto Web Cricket Clicks Cricket Clicks Tools/Utilities Bluetooth 7.1.1 Add New Device 7.1.2 Registered List 7.1.3 Bluetooth Settings 7.1.3.1 7.1.3.2 7.1.3.3 7.1.3.4 Calendar Memo Pad Alarm Clock 7.4.1 Alarm 1 7.4.2 Alarm 2 7.4.3 Alarm 3 World Time Calculator Stop Watch Converter 7.8.1...
Page 41 Voice Settings 8.2.1 Choice Lists 8.2.2 Sensitivity 8.2.3 Digit Dialing 8.2.4 Sound 8.2.5 Voice Launch 8.2.6 About Settings Location Display Settings 9.2.1 Menu Style 9.2.2 Wallpaper 9.2.2.1 9.2.2.2 9.2.3 Clock Format 9.2.3.1 9.2.3.2 9.2.4 Theme 9.2.5 Dialing Font 9.2.5.1 9.2.5.2 9.2.6 Banner 9.2.7...
Page 42 9.3.2 Ringer Type 9.3.2.1 9.3.2.2 9.3.3 Alerts 9.3.3.1 9.3.3.2 9.3.3.3 9.3.3.4 9.3.3.5 9.3.4 Key Tone 9.3.4.1 9.3.4.2 9.3.5 Dynamic Vibration Call Settings 9.4.1 Restriction 9.4.2 Call Answer 9.4.3 Auto Answer 9.4.4 Auto Retry 9.4.5 TTY Mode 9.4.6 Voice Privacy 9.4.7 Data Settings Phone Settings 9.5.1...
Page 43 9.5.4 System Select 9.5.5 Set Time 9.5.6 Quick Search 9.5.7 PC Connection Memory Info Phone Info 9.7.1 Phone Number 9.7.2 Icon Glossary 9.7.3 Version 9.7.4 9.7.5 Warranty data code Menu Outline Menu Navigation...
Page 44: Section 5: Entering Text
Section 5: Entering Text Topics Covered • Changing the Text Entry Mode • Using T9® Mode • Using Abc Mode • Entering Numbers • Entering Symbols This section outlines how to select the desired text entry mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the number of key strokes you must make when entering text.
Page 45: Changing The Text Entry Mode
Changing the Text Entry Mode Text messages can be made up of alphabetical characters, numbers, and symbols. You can use the following text entry modes to simplify text entry: T9 Word — Press each key only once to enter the letter of the word that you’re •...
Page 46: Adding Words To The T9 Word Dictionary
Abc is highlighted. Use the Up and Down navigation keys to highlight T9Word, then press • For practice, enter the word “Samsung” by pressing each of the following keys only once: pqrs T9 Word recognizes that the most commonly used word for the numeric sequence you just entered is “Samsung.”...
Page 47: Using Abc Mode
Using Abc Mode In standby mode, press the MENU key ( Messages), Enter the phone number of the recipient, then press Press the left soft key ( • T9Word • Abc • ABC • 123 • Symbols The current text entry mode is highlighted. Use the navigation keys to highlight Abc, then press •...
Page 48: Entering Symbols
Entering Symbols Symbol mode enables you to enter symbols such as “@” or “%” into a text message. In standby mode, press the MENU key ( Messages), Enter the phone number of the recipient, then press Press the (left) soft key ( •...
Page 49: Section 6: Understanding Your Contacts
Section 6: Understanding Your Contacts Topics Covered • Contacts • Finding a Contacts Entry • Adding a New Contacts Entry • Editing a Contacts Entry • Saving a Number After a Call • Speed Dial • Contacts Groups • Deleting a Contacts Entry •...
Page 50: Open Contacts
Contacts Up to 500 entries can be stored in Contacts. Each entry can have up to five associated phone numbers and two e-mail addresses. Each phone number can be up to 32 digits in length, including 2-Sec or Wait pauses (see “Manual Pause Calling”...
Page 51: Finding A Contacts Entry
Finding a Contacts Entry Voice Method Use the VoiceSignal Lookup command to view contact information for any named contact stored in your Contacts list by saying the name. Note: The Lookup command shows the requested contact information in the display but does not dial any phone numbers for the contact.
Page 52: Adding A New Contacts Entry
Soft Key Method If you’ve stored a name entry in Contacts, Find allows you to find it quickly. In standby mode, press the Contacts (right) soft key ( The Find screen appears in the display with the Go To field highlighted, followed by the first few names in your Contacts list.
Page 53: Menu Method
Use the navigation keys to select Create New and press the Select Type screen appears in the display showing the following icons: Mobile Pager Home Work Use the navigation keys to highlight the type that matches your new entry, then press the Use the keypad to enter a name to associate with the Contacts entry.
Page 54: Editing A Contacts Entry
Press the key to save the new entry. Editing a Contacts Entry Editing Contacts Name and Numbers Find the Contacts entry you wish to change. See “Finding a Contacts Entry” on page 51 for more information. Use the navigation keys to highlight the entry and press the View Contact screen appears in the display showing the highlighted entry’s information.
Page 55: Pause Dial From Contacts
2-Sec Pause — Stops the calling sequence for two seconds, then sends the • remaining digits. Note: You can enter multiple Waits to extend the length of a pause. For example, two consecutive Waits cause a total pause time of four seconds. Keep in mind that pauses count as digits towards the 32- digit maximum.
Page 56: Assigning A Picture To A Contacts Entry
Use the keypad to edit the e-mail address. (See “Entering Text” on page 44 for more information.) Press the key to save your changes. Assigning a Picture to a Contacts Entry When you assign a picture to a Contacts entry, the picture that you assigned to the entry appears in the display when you receive a call from that Contact.
Page 57: Assigning A Ringtone To A Contacts Entry
Assigning a Ringtone to a Contacts Entry When you assign a ringtone to a Contacts entry, the phone plays the ringtone that you assigned to the entry when you receive a call from that Contact instead of the ringtone currently assigned to Voice Calls. Find the Contacts entry you want to edit.
Page 58: Create A New Entry
Follow the instructions in the upcoming sections depending on whether the number is a new entry or you wish to add it to an existing entry. Create a New Entry Use the navigation keys to highlight Create New and press the The Create New screen appears in the display showing the following number type options: Mobile...
Page 59: Speed Dial
Press the key. The following number type options appear in the display: Mobile Pager Home Work Number types that are already assigned a number show the number instead of the number type label. Use the navigation keys to highlight the desired unassigned number type, then press the display with the new number posted in the appropriate number type field.
Page 60: Changing A Speed Dial Location
After entering the Contacts entry name, do not press the Instead, use the navigation keys to highlight the number field. Press the Options (right) soft key ( the display: • Set Speed Dial — Assign a speed dial number. • Set as default — Set the number the phone will dial when Contracts dialing, speed dialing, or voice dialing.
Page 61: Contacts Groups
Press the Options (right) soft key ( the display: • Remove speed dial — Unassign the current speed dial number. • Set as default — Set the number the phone will dial when Contracts dialing, speed dialing, or voice dialing. •...
Page 62: Using Group Add Option
Use the Up and Down navigation keys to highlight the Group to which you want to assign the selected Contact, then press the You are returned to the Add New Entry/Edit Contact screen and the selected Group name populates the Group field. Press the key to save your changes.
Page 63: Rename A Group
When you have marked the Contacts you want to add to the group, press the Done (left) soft key ( display, followed by the selected Group list including the added Contacts. Rename a Group The Rename option lets you change the name any of the Groups, except No Group. In standby mode, press the MENU key ( Contacts) and display.
Page 64: Erase A Group
When you have completed entering the new Group name, press the SAVE key ( “Group Saved” appears in the display followed by the Group List screen showing your new Group. Erase a Group The Erase option lets you delete a Group, thus freeing you to reassign the Contacts formerly in the Group.
Page 65: Memory Info
Use the navigation keys to highlight Erase, then press the phone prompts you to confirm the erasure. Press the Yes (left) soft key ( Contact. Press the No (right) soft key ( Memory Info The Memory Info menu option lets you view the amount of memory you have used to store Contacts entries, as well as the memory remaining to store more Contacts entries.
Page 66: Section 7: Cricket Clicks
Section 7: Cricket Clicks Topics Covered • Accessing Cricket Clicks With Cricket Clicks, you can download full featured applications over the air including games, personalized ring tones, pictures, and more. You can send and receive instant messages and email, or browse the web to catch up on all the latest news.
Page 67: Accessing Cricket Clicks
Accessing Cricket Clicks Applications Shopping and Downloading Download games, ring tones, e-mail, and more using the Cricket Clicks. In standby mode, do one of the following to launch Cricket Clicks: • Press the Right navigation key. • Press the Menu key ( for Cricket Clicks.
Page 68: Using Online Help
The following options appear in the display: • Order Apps — Download applications over the network. • Move Apps — Move previously downloaded applications between available folders. • Manage Apps — View used and available memory. • Main Menu View — Select whether you wish to view the main Cricket Clicks menu in a list or small icon format.
Page 69: Section 8: Messaging
Section 8: Messaging Topics Covered • Types of Messages • Create and Send Text Messages • Receive Text Messages • Send Picture Messages in Camera Mode • Send Picture Messages in Standby Mode • Receive Picture Messages • Message Boxes •...
Page 70: Types Of Messages
Types of Messages Your phone is able to send and receive Text and Picture messages to compatible phones and devices. Text messages can be up to 150 characters in length. Note: Available memory is shared between all messages. You can store up to 100 messages. However, the exact number is dependent upon message length.
Page 71: Receive Text Messages
Receive Text Messages When you receive a message in standby mode, the ringer sounds (unless turned off) and New Message appears in the display along with the closed envelope icon ( ). The date and time of the message also appear in the display along with the following options: View Now —...
Page 72 Press the key to save the picture and begin delivery process. The Create Pic Msg screen then appears in the display with the Send To: list highlighted. Enter the phone number or e-mail address of the recipient of the Picture message, then press the Tip: Press the Add (right) soft key ( Calls, and OnlineAlbum.
Page 73: Send Picture Messages In Standby Mode
• Validity Period — Enter the Date when this message will cease to be valid, then use the Left and Right navigation keys to choose the Time. • Deferred Delivery — Enter the Date, and use the Left and Right navigation keys to choose the Time, when this message will be delivered.
Page 74 Press the Down navigation key until the Pic: field is highlighted, then press the Images (left) soft key ( appears in the display. Use the navigation keys to highlight a picture to be added to your message, then do the following: •...
Page 75: Receive Picture Messages
• Deferred Delivery — Enter the Date, and use the Left and Right navigation keys to choose the Time, when this message will be delivered. • Remove Pic — Remove the picture from your message. • Remove Sound — Remove the sound file from your message. •...
Page 76: View A Picture Message Now
View a Picture Message Now After you select the View Now option, “Connecting” appears in the display followed by “Receiving Message” and a progress bar indicating that the message is downloading to your phone. After the Picture message has downloaded, an alert sounds, and the new Picture message appears in the display.
Page 77: Managing Inbox Messages
While viewing your message press the Options (right) soft key ( following options appear in the display: • Forward — Send a copy of this message to another recipient. • Reply With Copy — Compose and send a reply message to the originator of the received message and include a copy of the original message.
Page 78: Messages And Lock Mode
Outbox Your phone stores messages in the Outbox, regardless of whether the message was successfully transmitted. Verify if and when a message or e-mail was successfully received by enabling the Enh. Delivery Ack/Delivery Ack feature. Review Messages in the Outbox In standby mode, press the Up navigation key, then press Your list of sent messages appear in the display.
Page 79: Draft Box
• Lock / Unlock — Block/permit erasure of the highlighted message. • Add To Contacts — Save the recipient’s number to your Contacts. • Erase Outbox — Delete all unlocked messages from the Outbox. • Message Info — Shows message delivery status, addressee, size, and so on. Use the navigation keys to highlight an option.
Page 80: View And Edit Draft Pic. Messages
– Add To Contacts — Save the recipient’s number or e-mail address as a Contacts list entry. – Delivery — Specify whether you want a Msg Recipt when your messages are received, the Priority of your messages (Urgent or Normal), whether to include your callback number (CB#) in your messages, whether to include your Signature in your messages.
Page 81: Managing Draft Messages
Managing Draft Messages In standby mode, press the Up navigation key, then press A list of any draft messages that you’ve composed appears in the display. Use the navigation keys to highlight a message. Press the Erase (left) soft key ( from the Drafts box.
Page 82: Erase Messages
Press the key or the the message. Note: You can also press and hold Erase Messages You can erase all of the messages in each your boxes from one convenient location. Note: This function erases all messages in the selected box. To delete a single message, open the box from the Messages menu, then delete the message from the Options menu while viewing the message content.
Page 83 • CB# — Choose whether to include a callback phone number with your outgoing messages, and enter the number to be included. • VM# — Edit or view your Voicemail number. • Signature — Choose whether to include a text signature in outgoing message text, and enter the text to be included.
Page 84: Section 9: Browser
Section 9: Browser Topics Covered • Browser • Launching Browser • Using Browser • Using Links • How Browser Keys Work This section outlines how to launch Browser, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed.
Page 85: Stored Web Content
Browser With Browser, you can conveniently surf the web and download ringtones and wallpapers using your phone. Each time you launch Browser, your phone connects to the Internet and the service indicator icon ( Stored Web Content Browser ends an Internet connection after a certain period of inactivity, however some information from your session remains stored in the phone (if you leave your phone turned on).
Page 86: Browser Soft Keys
Browser soft keys the bottom of the Browser display is a bar that contains browser commands. The Left and Right ( ) soft keys on the keypad are used to execute the command that appears above them in the display. These are called “soft keys” because their function changes depending on the application.
Page 87 How Browser Keys Work End Key — Press to exit the Browser and return the phone to standby mode. Left Soft Key — Press to activate the command that appears above it in the display. Right Soft Key — Press to activate the command that appears above it in the display.
Page 88: Section 10: Voice Svc
Section 10: Voice SVC Topics Covered • Voice SVC Options • Voice Commands • Voice Settings This section explains how you can use and customize your phone’s VoiceSignal voice recognition feature.
Page 89: Voice Svc Options
Voice SVC Options Your Siren includes VoiceSignal, state-of-the-art voice recognition software that lets you use your voice to dial numbers, access your Contacts list, and open Tools/ Utilities. To access your phone’s voice recognition, do the following: In standby mode, press the MENU key ( SVC.
Page 90: Voice Command Tips
Go to <Menu> — Lets you access the following list of your phone’s features and • functions: – Recent Calls – Messages – Contacts – Multimedia – Browser – cricket clicKs – Tools – VoiceSVC – Settings Check <Item> — Lets you say a single command (such as “Status”) to verify •...
Page 91: Digit Dialing
Press the key or the OK (left) soft key ( Press the key to discard the new setting and return to the Voice Settings menu. Sensitivity In standby mode, press the MENU key ( SVC), (for Voice Settings), and Use the Up and Down navigation keys to adjust the selected Sensitivity setting incrementally between Reject More spoken commands or names and Reject Less spoken commands or names.
Page 92: Adapt Digits
Adapt Digits To adapt digit dialing, do the following: In standby mode, press the MENU key ( SVC), (for Voice Settings), and following options appear in the display: • Adapt Digits • Reset Digits Use the navigation keys to highlight Adapt Digits, then press the Your phone displays text describing the Adapt Digits process.
Page 93: Voice Launch
Use the navigation keys to highlight Reset Digits, then press the The phone prompts you to confirm digit rest. Press the OK (left) soft key ( Back (right) soft key ( Sound Sound lets you specify what (if any) text prompts you want your phone to read to you through the earpiece.
Page 94 About This option causes the About VoiceSignal screen to appear in the display, showing version and build information about the VoiceSignal software included on your phone. In standby mode, press the MENU key ( SVC), (for Voice Settings), and The About VoiceSignal screen appears in the display showing the version level of the VoiceSignal software currently installed on your phone.
Page 95: Section 11: Multimedia
Section 11: Multimedia Topics Covered • Camera • Using My Images Gallery • Using My Ringtones Gallery • Using My Sounds Gallery Use your Siren phone to take full color digital pictures, display them on your phone’s vivid color display, and instantly share them with family and friends. With Cricket Clicks, you can download personalized ringtones, pictures, and more.
Page 96: Camera
Camera Taking Pictures Taking pictures with the built-in camera is as simple as choosing a subject, pointing the lens [located on the outside of the folder (above the external display)], and pressing a button. Simple Snap Shot To take a single picture using the current camera settings, do the following: In standby mode, press and hold the camera key ( ) on the right side of the phone.
Page 97: Camera Screen
Camera Screen When you activate your phone’s camera, the second line of the display is reserved for the current camera resolution setting and the picture counter. The center of the display shows a viewfinder image of the subject at which the camera is pointed. The soft key labels on the bottom line of the display change to the following: Gallery —...
Page 98: Camera Shortcuts
Zoom — Indicates the current Zoom setting [0 (no Zoom) shown]. The direction arrows indicate that the Left and Right navigation keys adjust the Zoom setting. Brightness setting [0 (no Brightness) shown]. The direction arrows indicate that the Up and Down navigation keys adjust the Brightness setting.
Page 99: Delay Pictures With The Self Timer
Set Camera Resolution In camera mode, press the Options (right) soft key ( options appear in the display: • Resolution • Self Timer • Flash • White Balance • Quality • Shutter Sounds • Color Tones Use the navigation keys to highlight Resolution, then press the The following options appear in the display: •...
Page 100: White Balance
The next time you press the Camera key ( ) or the timer appears in the display that indicates the time remaining before the camera takes the picture. Flash Flash lets you take pictures in low light. In camera mode, press the Options (right) soft key ( options appear in the display: •...
Page 101 Use the navigation keys to highlight White Balance, then press the key. The following White Balance options appear in the display: • Auto — The camera automatically adjusts picture quality to available light. • Sunny — Use this setting when taking pictures in full sun. •...
Page 102: Color Tones
Use Shutter Sounds Choose from three different sounds whenever you take a picture. Aside from being a cool sound effect, Shutter Sounds acts as an audible reminder that your camera has taken the picture. In camera mode, press the Options (right) soft key ( options appear in the display: •...
Page 103: Using My Images Gallery
• Sepia • Green • Aqua • Antique • Cool • Warm • Sketch Use the Right and Left navigation keys to highlight one of the Color Tones, then press the to your next picture. Using My Images Gallery My Images lets you manage your photos and pictures you download, and lets you choose the pictures that appear in your phone’s display when you turn it on or off, while in standby mode (wallpaper), and as image IDs for your contacts.
Page 104: Using My Ringtones Gallery
Press the key to return to the previous menu, or press the to return to standby mode. Using My Ringtones Gallery My Ringtones lets you assign ringtones for calls, alarms, and other alerts. In standby mode, press the MENU key ( Multimedia) and display.
Page 105 • Press the Options (right) soft key ( display: – Send — Send to someone as part of a Picture message. (See “Send Picture Messages in Standby Mode” on page 73 for more information.) – Online Album — Send the highlighted image to your Online Album on your Wireless Provider’s server.
Page 106: Section 12: Tools/Utilities
Section 12: Tools/Utilities Topics Covered • Bluetooth • Calendar • Memo Pad • Alarm Clock • World Time • Calculator • Stop Watch • Converter • Tip Calculator This section explains how you can use your phone’s Personal Information Manager (PIM) functions to view today’s calendar, schedule appointments, set an alarm, perform simple math calculations, and more.
Page 107: Add New Device
Bluetooth Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of about 30 feet without requiring a physical connection. Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a range of one another, you can exchange information between them, even if they are located in different rooms.
Page 108: Disconnecting From A Bluetooth Device
Press the PAIR key ( are prompted to enter the passkey or PIN for the selected device. Enter the device passkey or PIN and press the appears to inform you the connection is complete. Registered List This menu provides a list of Bluetooth wireless technology devices discovered by your handset.
Page 109: Bluetooth Settings
Bluetooth Settings Enable/Disable Selecting this option turns Bluetooth on or off. Discovery Mode Allows other users to see your accessibility. Select On for other devices to see your device, or Off for no visibility. Device Name Shows the handset name. You may change this name. Enter the text and press the key.
Page 110: Add A New Event
• Monthly — Repeat this event monthly. • Erase — Remove this event from the Calendar. • Erase all — Remove all events scheduled for this month from the Calendar. Use the navigation keys to highlight an option. Press highlighted option. Add a New Event In standby mode, press the MENU key ( (for Tools/Utilities) and...
Page 111: Memo Pad
Press to store the event in your calendar. An alarm will notify you prior to the event, if Reminder is set to a value other than Off. Memo Pad Create notes and store them in Memo Pad. Notes that you create in Memo Pad can’t be prioritized or assigned an alert.
Page 112: Alarm Clock
Press the Options (right) soft key ( the display: • Edit— Change the currently highlighted memo. • Erase — Erase the highlighted memo. • Erase all — Erase all of the unlocked memos. • Lock / Unlock — Prevents/allows erasure of the highlighted memo. Press to VIEW a highlighted memo.
Page 113: When An Alarm Sounds
• Enter the time for the alarm using the keypad. • Use the Left and Right navigation keys to select AM or PM, or press AM and press Use the Left and Right navigation keys to select the Frequency at which you wish the alarm to occur (Daily, Mon.-Fri., Weekends, or Once).
Page 114 Note: To use World Time, you need to subscribe to your Cellular Provider’s digital service. In standby mode, press the MENU key ( Utilities) and Use the Left and Right navigation keys to browse cities and their current times. The following cities are supported. New York Caracas Cape Verde...
Page 115: Calculator
Calculator You can perform calculations, including addition, subtraction, multiplication and division using your phone. In standby mode, press the MENU key ( Utilities) and Enter the first number in your equation using the keypad. (Numbers can be up to nine digits long.) •...
Page 116: Converter
Converter The conversion menu provides the following conversion categories: Currency • Length • Weight • Volume • Area • Temperature • To convert a currency, length, weight, volume, area, or temperature, do the following: In standby mode, press the MENU key ( Utilities) and in the display: •...
Page 117: Currency - Adding Exchange Rates
Press the EDIT key ( display. Use the Up and Down navigation keys to highlight a currency whose exchange rate you wish to change. Use the keypad keys to change the selected exchange rate value. Press the key to save the changed exchange rate. The EXCHANGE RATE list appears in the display.
Page 118: Currency - Erasing Exchange Rates
Currency — Erasing Exchange Rates You cannot erase the preloaded currencies from the Exchange Rate list. You can erase a currency that you have added to the list by doing the following: In standby mode, press the MENU key ( Utilities), (for Converter), and Press the Rate (left) soft key (...
Page 119: Section 13: Settings
Section 13: Settings Topics Covered • Location Setting • Display Settings • Sound Settings • Call Settings • Phone Settings • Memory Info • Phone Info This section explains how to configure your phone’s language, network preferences, security options, and other settings. Settings...
Page 120: Location Setting
Location Setting You can set your phone to pass Global Positioning System (GPS) data to identify your location to the network continually or only when you make an emergency (911) call. Note: Check with your Wireless Carrier to determine if/when/where location-based services are available. In standby mode, press the MENU key ( Settings) and the display:...
Page 121: Clock Format
Use the navigation keys to highlight a sub-menu. Press the key to enter the highlighted sub-menu. The following sections describe the Display sub-menus in greater detail. Menu Style In standby mode, press the MENU key ( Settings) and following options appear in the display: •...
Page 122: Dialing Font
The following clock options appear in the display: • Main Clock • Front Clock Use the navigation keys to highlight the desired clock, then press the key. The following clock format options appear in the display: • Digital — Time, date, and day of the week are shown using an alternate, large digital format.
Page 123 Use the Up and Down navigation keys to highlight the desired dialing font characteristic, then press the • If you select Style, the following Style options appear in the display: – Normal – Quill Pen – Sticky – Color Dial Use the Left and Right navigation keys to highlight the desired setting and press the •...
Page 124: Sound Settings
In standby mode, press the MENU key ( Settings) and following sub-menus appear in the display • Main Display — Sets the time the internal display backlight remains on after a period of inactivity. Optional settings are: 7 seconds, 15 seconds, 30 seconds, Always On, and Always Off.
Page 125: Ringer Type
• Messages — Lets you set your phone to be silent, play a sound, and/or vibrate in response to incoming messages. • Alarms — Lets you set your phone to be silent, play a sound, and/or vibrate in response to a preset alarm time being reached. Use the Up and Down navigation keys to highlight the desired option, then press the key.
Page 126: Key Tone
Alerts You can set your phone to sound an alert whenever you enter or leave your service area, connect or disconnect a call, and other options. In standby mode, press the MENU key ( Settings), (for Sound Settings), and options appear in the display: •...
Page 127: Call Settings
Dynamic Vibration Set your phone to vibrate in sync with ringtones and melodies your phone plays. In standby mode, press the MENU key ( Settings), (for Sound Settings), and Use the navigation keys to highlight On or Off Call Settings The Call Settings sub-menu lets you set call options such as Auto Retry, Data rates for data calls, and more.
Page 128: Auto Answer
Use the navigation keys to highlight the method you wish to use for answering calls, then press the Auto Answer Auto Answer enables your phone to automatically answer calls after a period of time that you specify. In standby mode, press the MENU key ( Settings), (for Call Settings), and following options appear in the display:...
Page 129: Voice Privacy
pops-up warning of possible headset and non-TTY accessory performance impairment when in TTY mode and prompting you to confirm that you want to enable/disable TTY Mode. • Press the Yes (left) soft key ( setting. • Press the No (right) soft key ( The following options appear in the display: •...
Page 130: Data Settings
Data Settings Use the Data Settings sub-menu to set your phone to detect data connections automatically. In standby mode, press the MENU key ( Settings), (for Call Settings), and following options appear in the display: • Data Off — Your phone ignores data connections. •...
Page 131: Lock Phone
Language The Language option changes the language of menus, sub-menus, and other user- interface features. In standby mode, press the MENU key ( Settings), (for Phone Settings), and The following options appear in the display: • English • Español Use the navigation keys to highlight your language preference, then press key.
Page 132: Change Lock
Press to perform the function for the highlighted option. Change Lock The default lock code is generally the last four digits of your phone number. It is advisable to change the default lock code to a secret code for security purposes. In standby mode, press the MENU key ( Settings), (for Phone Settings), and...
Page 133: Reset Phone
Remember to always turn your phone on and check for adequate signal strength before placing a call. Note: When you dial an emergency number, you phone locks itself to the emergency location that answered the call and locks itself in 911-Only mode, blocking from dialing any number but an emergency number.
Page 134: System Select
Enter the four-digit lock code using the keypad. Note: The default lock code is the last four digits of your mobile phone number. The “Enter Code” prompt disappears and the Security menu appears in the display. Press for Reset Phone. A prompt appears in the display to restore default settings (except for Contacts Press the Yes (left) soft key ( settings.
Page 135: Quick Search
Use the Up and Down navigation to highlight Set Time, then press the key. The Set Time screen appears in the display. Enter the current time using your keypad: • The hour and minute must be entered using two digits each. You must enter the hour in 12-hour format.
Page 136: Searching For A Contact
Searching for a Contact In standby mode, press the first few numeric keys that correspond to the letters of the contact’s name. For example, to search for “Sally” you would enter pqrs Press the Up navigation key. The contact name is highlighted. Press the key to call the contact.
Page 137: Memory Info
Memory Info Memory Info shows the amount of phone memory that is available and used, and details the distribution of the used memory. In standby mode, press the MENU key ( Settings) and The Memory Info screen appears in the display listing the following information: •...
Page 138: Warranty Data Code
Version You can view the PRL (Preferred Roaming List), ERI (Extended Roaming Indicator), software version, and hardware version on your phone. This feature is helpful if you need to contact Customer Service. In standby mode, press the MENU key ( Settings), (for Phone Info), and pqrs...
Page 139: Section 14: Health And Safety Information
Section 14: Health and Safety Information Topics Covered • Health and Safety Information • Samsung Mobile Products and Recycling • UL Certified Travel Adapter • Consumer Information on Wireless Phones • Road Safety • Operating Environment • Using Your Phone Near Other Electronic Devices •...
Page 140: Health And Safety Information
Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government. These FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE).
Page 141: Samsung Mobile Products And Recycling
SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar. Samsung Mobile Products and Recycling Samsung cares for the environment and encourages its customers to recycle Samsung mobile phones and genuine Samsung accessories. Go to: http://www.samsungwireless.com/recycling.htm for more information.
Page 142: What Kinds Of Phones Are The Subject Of This Update
What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head.
Page 143: What Are The Results Of The Research Done Already
Support needed research into possible biological effects of RF of the type emitted • by wireless phones; Design wireless phones in a way that minimizes any RF exposure to the user that • is not necessary for device function; and Cooperate in providing users of wireless phones with the best possible information •...
Page 144: What Research Is Needed To Decide Whether Rf Exposure From Wireless Phones Poses A Health Risk
develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.
Page 145: What Steps Can I Take To Reduce My Exposure To Radio Frequency Energy From My Wireless Phone
Project has also helped develop a series of public information documents on EMF issues. FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations.
Page 146: Do Hands-Free Kits For Wireless Phones Reduce Risks From Exposure To Rf Emissions
December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? Since there are no known risks from exposure to RF emissions from wireless...
Page 147: Road Safety
sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI.
Page 148 When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips: Get to know your wireless phone and its features, such as speed dial and redial.
Page 149: Operating Environment
Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number.
Page 150: Hearing Aid Compatibility With Mobile Phones
If you have any reason to suspect that interference is taking place, switch your phone off immediately. Hearing Aid Compatibility with Mobile Phones When some mobile phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.
Page 151: Posted Facilities
Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Switch your phone off in any facility where posted notices require you to do so.
Page 152: Restricting Children's Access To Your Phone
If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider. When making an emergency call, remember to give all the necessary information as accurately as possible.
Page 153: Product Performance
Do not store or carry flammable liquids, gases or explosive materials in the same • compartment as the phone, its parts or accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great • force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area.
Page 154: Availability Of Various Features/Ring Tones
Battery Precautions Avoid dropping the cell phone. Dropping it, especially on a hard surface, can • potentially cause damage to the phone and battery. If you suspect damage to the phone or battery, take it to a service center for inspection.
Page 155 Use only Samsung-approved batteries and recharge your battery only with • Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.
Page 156: Samsung Mobile Products And Recycling
Samsung Mobile Products and Recycling Samsung cares for the environment and encourages its customers to recycle Samsung mobile phones and genuine Samsung accessories. Go to: http://www.samsungwireless.com/recycling.htm for more information. Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care.
Page 157 Care and Maintenance If the phone, battery, charger or any accessory is not working properly, take it to • your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service. Health and Safety Information...
Page 159: Section 15: Warranty Information
Section 15: Warranty Information Topics Covered • Standard Limited Warranty Warranty Information...
Page 160: Standard Limited Warranty
(i) the battery has been charged by a battery charger not specified or approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery are broken or show evidence of tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for which it is specified.
Page 161 Warranty on the original Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all parts, shipping, and labor charges for the repair or return of such Product.
Page 162 STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE...
Page 163 SAMSUNG are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by SAMSUNG and should not be relied upon. Samsung Telecommunications America, LLC...
Page 164: Index
Index Numerics 2-sec pause Adding a new Contacts entry Dial Method Adjust key tone ringer setting Alarm clock set the alarm turn off the alarm when an alarm sounds Alerts Auto Answer Auto Retry Backlight Banner Battery charging Low battery indicator removal Travel adapter Brightness, pictures...
Page 165 Contacts add pauses Adding a new Contacts entry edit name and numbers opening Save a number after a call Contacts List Memory Contrast Create messages Cricket Clicks On-line Help Settings Data Counter Data Settings Data, view counters Delay pictures Dialing Font Display Display screen icons Display Setting...
Page 166 Key Tone Language Left soft key Lock code, changing Lock mode Lock phone Menu Navigation Menu Outline Menu Style Message folder draft box inbox outbox voice voice mail Message Folders Erase messages Messages and lock mode Messages, creating Messages, receive in call Messaging Types of Messages Missed calls menu...
Page 167 Pictures brightness quality shutter sounds zooming in Quality, pictures Receive messages in call Receive pic. messages Receive text messages Recent Calls call timer data counter erase logs incoming missed outgoing store numbers Recent Calls menu Reset your phone Resolution, notes about Restriction Return to last menu Review calls...
Page 168 Speakerphone Key Standard Limited Warranty Standby mode Store emergency #s Store numbers after a call Take pictures with flip open Taking pictures Talk mode Text entry modes Text messages, receiving Text Modes changing Theme Three-way calling Timer, calls Timer, camera Tip, description Tools calendar...

This manual is also suitable for:

Sch a870 - cell phone - verizon wireless Sch-a870mbavzw

Samsung Siren Series User Manual

Section 1: Getting Started

Section 2: Understanding Your Phone

Section 3: Call Functions

Section 4: Menu Navigation

Section 5: Entering Text

Section 6: Understanding Your Contacts

Section 7: Cricket Clicks

Section 8: Messaging

Section 9: Browser

Section 10: Voice SVC

Section 11: Multimedia

Section 12: Tools/Utilities

Section 13: Settings

Section 14: Health and Safety Information

Section 15: Warranty Information

Index

Quick Links

Need help?

Questions and answers

Related Manuals for Samsung Siren Series

Summary of Contents for Samsung Siren Series