Table of Contents
Advertisement
Automatic positive control process
Automatic standby mode
2.4.5
Control elements and indicators at the press machine
Display
Pressgun 6 press machine with battery
The Pressgun 6 operates with a voltage of 18 V DC.
The press machine operates by a positively controlled process. This
means:
The Start button must be pressed until a minimum force is reached.
n
The automatic process completes the pressing from this point until
the entire press stroke has been carried out.
The roller head then returns to its starting position.
Until the minimum force is reached, even when the Start button is
n
temporarily released, the roller head of the press machine stays in
the position reached.
The pressing can be continued or aborted, see
'Aborting the pressing process' on page 21.
If the press machine is not used for 150 seconds, it will automatically go
into standby mode.
032000
1
Temperature symbol*
2
Maintenance symbol*
3
Battery indicator
4
Number of pressings
* This symbol will be shown if there is a malfunction; see also
3.5 'Troubleshooting' on page 22.
Product information
Ä Chapter 3.4
Ä Chapter
15
Advertisement
Table of Contents
