Table of Contents
Advertisement
MEMORY
From the
stored in the internal memory to the Memory Key or to print them on the MiniPrinter.
You can now select the data output path, see paragraph 6, by depressing:
F2 (EPR) to select an External Printer (*) via
COM2, located on the back panel, see par-
agraph 4.6.1.
(*) customer printer connected in serial on
COM2 at 9600 baud-rate
F3 (MSK) to select the Memory Key, inserted in its slot on the front panel.
Before starting a new experimental session, we suggest checking the
memory which may contain some data of the previous trial.
If it is the case, enter the proper software level and
paragraph 7.1
7.1
Memory Reset
From the Memory menu, the F3 key (RES)
enables the operator to reset the data
stored in the memory.
Answer (YES) (F3 key) or (NO) (F4 key) to
"ARE YOU
the question:
Menu, the F2 (OUT) key enables the researcher to export the data
SURE?".
37360 Instruction Manual (Rev. 0)
To interrupt the print-out response of the
stored data, depress the F4 (ESC) key for
one second at least.
Page 18
RESET
the memory, see
Advertisement
Table of Contents
