Table of Contents
Advertisement
Calibration is recommended, if the Radiometer 37300 is available, see paragraph 9-
CALIBRATION.
10.5
Customer Support
For any further information you may desire concerning the use and/or maintenance of the
Tail Flick Unit and accessories, please do not hesitate to contact our service department
(or
our
local
http://www.ugobasile.com/support.html
UGO BASILE s.r.l.
Via G. Di Vittorio 2
21036 GEMONIO – Varese, ITALY
Phone : +39 0332 744574
service@ugobasile.com
logistics@ugobasile.com
sales@ugobasile.com
Before sending any instrument to our factory for repair, please contact our logistics
department to obtain a return authorization number (RMA) and shipping/packing instruc-
tions.
We may not be held responsible for damages during transport due to poor packing;
whenever possible, please use the original packing.
11
INSTRUMENT SPECIFICATIONS
Operation
Power Requirement
Commands
Read-out
Print-out
Starting
I.R. Intensity
Latency Time
Connection to PC
Data Portability to PC
Calibration
Operating Temperature
distributor)
either
:
Universal mains 85-264 VAC, 50-60Hz
via soft-buttons
multifunction graphic display
Via optional thermal MiniPrinter or panel-mount printer
via pedal switch. Additional key on the Controller
Adjustable in the interval 01-99 (in one digit steps)
displayed on the graphic display, in 0.1s steps
via USB
Via USB pen-drive provided
Via appropriate I.R. Radiometer, see paragraph 9.1
10° to 40° C
37360 Instruction Manual (Rev. 0)
directly
of
via
Page 25
our
support
page
Advertisement
Table of Contents
