Hubbell Progress Lighting PCOLF Series Installation Instructions Manual

:
This LED Flood light uses the latest in solid state lighting technology for long life,
◼
low maintenance, and high efficiency.
Can be used from any nominal input voltage supply from 100-277V, 60Hz AC.
◼
Suitable for wet locations
◼
Note: Save these instructions for future reference.
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed,
inspected, and maintained by a qualified electrician only, in accordance with all applicable
electrical codes.
Warning:
To avoid electric shock:
• Be certain electrical power is OFF before and during installation and maintenance.
• Luminaire must be connected to a wiring system with an equipment-grounding conductor.
Warning:
To avoid explosion:
• Make sure the supply voltage is the same as the rated luminaire voltage.
• Do not operate in ambient temperatures above those indicated on the luminaire
nameplate.
• •Keep lens tightly closed when in operation.
For supply connections use wire rated for at least 90°C
Customer Service: 1-800-447-1723
INSTALLATION INSTRUCTION MANUAL
15W LED FLOOD LIGHT, 100-277VAC
1
PAGE 1 of 2 08/15/19
93109030