Hubbell Linear LED ALF12LU5KBZ Series Installation Instructions

DISCONNECT POWER DURING INSTALLATION AND BEFORE SERVICING.
READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE OR INJURY TO PERSONS
WARNING: T his product contains chemicals known to the State of California to cause cancer, birth
defects, and/or other reproductive harm. Thoroughly wash hands after installing, handling, cleaning,
or otherwise touching this product.
WARNING: Fixtures must be grounded in accordance with local codes or the National Electrical
Code. Portable spike mounts using a cord and plug must be plugged into a receptacle protected by
a Ground Fault Circuit Interrupter in accordance with the National Electrical Code. Failure to do so
may result in serious personal injury. DO NOT operate luminaire with missing or damaged lens.

WARNING:

T his Product must be installed in accordance with the applicable installation code by a
person familiar with the construction and operation of the product and the hazards involved. In
accordance with the applicable installation code.
CAUTION: Fixtures are suitable for mounting within 4FT of the ground; and fixtures are available in
120 to 277 volt input (Not for connection to a voltage above 240Vac in Canada). Please verify
before wiring fixture to field wires.
KEEP THIS SHEET FOR FUTURE REFERENCE.
INSTALLATION

Tools Required:

□1/8" Allen Wrench
1. Coat swivel threads with thread sealant. Attach coupling onto mounting device.
2. Attach fixture onto coupling.
Linear LED ALF12LU5KBZ Series

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS!
□Thread Sealant
WARNING
□Adjustable Wrench □Phillips Screwdriver
REV: A
04-12-2012