Table of Contents
Advertisement
User Manual – Electric Vehicle Charging Equipment IC-CPD
14. Back label of the ICCB
TEMPERA-
POWER
CHARGING
FAULT
Pictogram
Description
TURE
No electrical power supply detected
IC-CPD ready for use
Charging
The IC-CPD is currently running a self-test
Slow charging process due to increased temperature. The charging process
can take longer
Charging interruption due to increased temperature of the ICCB. Check the
grid socket or protect the IC-CPD charging equipment from direct sunlight
Interruption of the charging process due to increased temperature in the
power plug
Fault (
page 16)
The power grid is down or cannot be used for charging with this device.
The grid socket must be checked by a trained electrician
= ON
= OFF
= Flashing
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-CPD and is the answer not in the manual?
Questions and answers
Сломался термодатчик в вилке зарядного устройства к БМВ
The replacement options for the Aptiv IC-CPD temperature sensor include any thermistor that can detect a large temperature change. The B0/T1/T2 codes refer to packaging types and are irrelevant. Some thermistors may have date codes, which are also not important. Choose the cheapest option, as they are functionally the same for this purpose. If possible, keep the existing thermistor. The suggested replacement is a best-estimate match, likely not originally from Vishay.
This answer is automatically generated