Table of Contents
Advertisement
User Manual – Electric Vehicle Charging Equipment IC-CPD
11. Operation
For the operation of your IC-CPD
charging equipment, observe the
following instructions:
1. Read fully and understand the vehicle
manual and the instructions for the
IC-CPD charging equipment
Completely uncoil the cable of the
IC-CPD charging equipment
2.
Ensure that the cables are
routed correctly over their
entire length, in order to
avoid stumbling
3. Insert the power plug into the socket
4. Wait until the Power LED lights up
continuously
POWER
POWER
CHARGING
5. Insert the vehicle connector
TEMPERATURE
into the vehicle's charging inlet
FAULT
6. The charging process begins auto-
matically
CHARGING
7. To interrupt the charging process,
unlock the vehicle charging inlet
and remove the vehicle connector
8. Remove the power plug from the
socket
9. Keep the IC-CPD charging
equipment in a safe place
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-CPD and is the answer not in the manual?
Questions and answers
Сломался термодатчик в вилке зарядного устройства к БМВ
The replacement options for the Aptiv IC-CPD temperature sensor include any thermistor that can detect a large temperature change. The B0/T1/T2 codes refer to packaging types and are irrelevant. Some thermistors may have date codes, which are also not important. Choose the cheapest option, as they are functionally the same for this purpose. If possible, keep the existing thermistor. The suggested replacement is a best-estimate match, likely not originally from Vishay.
This answer is automatically generated