Keypad Operation Process; Parameter Setting - SAJ PDS33 Series User Manual

PDS33 Series
Item
>>（Shift key）
Knob Pulse potentiometer

4.2 Keypad Operation Process

4.2.1 Parameter Setting

Three levels of menu are as following
• Function code group (first-class)
• Function code (second-class)
• Setting parameter of function code (third-class)
In order to set up the electric automatic start function FD.07=1 as an example, the
modified parameter flow chart is as follows:
Stand By Status
(Frequency/HZ)
Display
0.00
Reading:
Button:
MENU
Run Status
(Frequency/HZ)
Display
0.00
Reading:
Button:
Name
RUN
STOP/RESET
MF.K
First Class
F0
First Class
FD
MENU
Figure 13 Schematic Diagram of Function Parameters
In the stop display interface and the running display
interface, the display parameters can be selected
cyclically; when the parameters are modified, the
modified bits of the parameters can be selected.
In keypad control mode，it can start the controller
Can be used for stop running or fault reset
Function switching
Can be source of set frequency
：
First Class Second Class
FD
FD.07
ENT
Second Class Third Class
New Value
FD.08
MENU
- 27 -
Function
Third Class
Value Now
0
ENT
1
ENT