Remove The Packaging; Checking Fittings; Checking The Nitrogen Pressure - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual

3.5.1 Remove the Packaging

Procedure
Step 1 Inspect the outer packaging for signs of damage. If any damage is found, contact
the shipping company immediately.
Step 2 Remove the packaging.
Figure 3-12 Removing the packaging
----End

3.5.2 Checking Fittings

Check the following items after unpacking the product:
●
●

3.5.3 Checking the Nitrogen Pressure

Procedure
Step 1 Open the No. 2nd maintenance door.
Step 2 Check whether any of the needle valve bonnets shown in
by turns.
Issue 06 (2020-08-19)
Check whether the cabinet exterior is intact, and free of collision and scratch.
If any damage is found, notify the carrier immediately.
Check the types and quantity of fittings against the fitting list. If there is any
problem, contact Huawei technical support.
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
Figure 3-13 is missing
41