Table of Contents
Advertisement
Available languages
Available languages
• Do not place on or near a hot gas or electric
burner, or in a heated oven.
• Extreme caution must be used when moving a
fryer containing hot oil.
• Always attach plug to the appliance first
(depending on model), then plug the cord in a
wall outlet. To disconnect, turn any control to
"off", then remove plug from a wall outlet.
• Do not use the appliance for other than intended
use.
• Be sure handles are properly assembled to the
basket and locked in place.
See detailed assembly instructions.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY.
• Warning: Possible Oil Splashing. Plunging cold/
wet food in boiling oil can create oil spattering,
as water's reaction to hot oil is extremely volatile
and unpredictable. Please, make sure to dry every
pace of food thoroughly before immersing it into
the hot oil.
• Before use, check that your local voltage
corresponds to the specifications shown on the
appliance nameplate located on the back of the
control panel.
EN
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FR600D51 and is the answer not in the manual?
Questions and answers
how do you get the heating element out so you can remove the oil
To remove the heating element from the T-Fal FR600D51 to drain the oil, first unplug the fryer and ensure the oil has completely cooled. Then, remove the control panel, which is attached to the heating element, by sliding it up. Once the control panel and heating element are removed, lift the oil tank out of the base and drain the oil.
This answer is automatically generated