Graco 26C624 Instructions Manual page 9

Manifolds 288219, 288220, and 26C622
6. In a circulating system, connect an electrically
conductive fluid hose to the gun fluid outlet (G).
In a non-circulating system, remove the gun fluid
outlet fitting (G) and plug the outlet port with the pipe
plug (109) supplied.
KEY
C Cylinder Air Inlet: accepts 1/4 in. (6.3 mm) O.D. tubing
F Fluid Inlet: 1/4-18 nptf or #5 JIC (1/2-20 unf)
G Fluid Outlet (circulating gun only): 1/4-18 nptf or #5 JIC (1/2-20 unf)
G (or F)
FAN
F . 5: Manifolds 288219, 288220, and 26C622
IG
311053L
C
F (or G)
ATOM
CYL
TI8113a
Manifold 244930
7. This manifold is equipped with passages for
circulating water to maintain the temperature of the
gun. Ports provided are:
- Side water inlet, 1/4 npt(f)
- Top water outlets, 1/8 npt(f)
- Side RTD sensor, 1/8 npt(f)
See Accessories, page 33, for available fittings and
sensors.
KEY
L Water Outlet: 1/8 npt(f)
M Air Inlet (to open valve): 1/8 npt(f)
N Fluid Inlet: 3/8(f)
P Water Inlet: 1/4 npt(f)
L
F . 6: Manifold 244930
IG
Setup
M
L
N
TI8115a
P
TI8116a
9