Tools Needed For Assembly; Carton Contents - QEP 900 XT PRO Owner's Manual

TOOLS NeeDeD FOr ASSeMBLY

Supplied
Blade wrench
universal wrench
8 mm hex key
3 mm hex key
Not Supplied
flat bladed screwdriver
Phillips screwdriver
framing square
adjustable wrench and/or
10 mm wrench

CARTON CONTENTS

UNpACKING AND CHeCKING CONTeNTS
carefully unpack the tile saw and all its parts, and
compare against the list below and the illustration on the
next page. With the help of an assistant place the saw
on a secure surface and examine it carefully.
WARNING
!
• to avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a source of
power during unpacking and assembly. the cord
must remain unplugged whenever you are adjusting /
assembling the tile saw.
• the tile saw is heavy and should be lifted with care.
if needed, get the assistance of someone to lift and
move the tile saw.
• if any part is missing or damaged, do not attempt to
assemble the tile saw, or plug in the power cord until
the missing or damaged part is correctly replaced.
TABLe OF LOOSe pArTS
ITEM DeSCrIpTION
a. cutting head assembly
B. Motor support arm
c. rip/angle guide assembly
d. Water pump
e. hardware bag: two wrenches,
8 mm hex key, 3 mm hex key,
anti-splash guard securing
screws, aaa batteries
f. hardware bag: side anti-splash
guard, rear anti-splash guard,
drain plug and water filter,
blade elevation locking knob
G. 10 in. diamond blade
h. cutting table assembly
i. Water pan
J. rear water catch tray
K. Side water catch tray (a)
L. Side water catch tray (B)
M. Stand assembly
n. Stand hardware bag
o. Wheels
P. Leg tube
8
QUANTITY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1