Password Configuration Screen - Novus TagTemp-Stick Instruction Manual

5.2.2 Device Configuration Screen
Fig. 05 – Device Settings Screens
• General: General settings
Device title: Text field in which you can define or view the
device title.
Logging interval: Text field in which you can define or view the
interval between each data acquisition.
Start Delay: This is the delay time between the TagTemp-S
configuration and the start of the logs.
Offset adjustment: Field where you can set or view the offset
value.
• Alarm range: Range of operation where the user defines the
limits that, in case of exceedance, result in alarm. The device
signals alarm via the LED. For more details on alarm activations,
the data must be collected through the LogChart-NFC or Nx
Software applications.
High: Valid range of operation (Maximum), connected to the
maximum alarm.
Low: Valid range of operation (Minimum), connected to the
minimum alarm.
• Options: The following options can be configured:
Start loggings by button: When you enable this option, you can
start logging data by pressing the logger button.
Stop loggings by button: When you enable this option, you can
stop logging by pressing the logger button.
Enable circular memory: When this option is enabled, when the
memory is complete, the recording will continue overwriting the
oldest records.
Use Fahrenheit degrees: when this option is enabled, the
temperature unit of Celsius (default) is changed to Fahrenheit.
• Device power options: the device can be placed in idle mode.
NOVUS AUTOMATION
Idle mode is a low-power option, in which the device does
operate.
• Password Configuration: The user can set a four-digit password
for device security. Using a password prevents unauthorized
persons from starting or stopping data logging by the LogChart-
NFC or Nx Software applications or even reconfiguring the
device, but does not prevent log data from being collected and
shared.
• Apply and Start Logging: Applies the settings and starts
recording the temperature.
Stop Logging: You can stop logging using the smartphone.
5.2.2.1

Password Configuration Screen

Fig. 06 – Password Configuration Screen
Fig. 07 – Password Configuration Screen
Note: Fig. 08 shows the screen to change the password.
TagTemp-S
not
4/11