Device Status Screen - Novus TagTemp-Stick Instruction Manual

Fig. 02 – Initial screen of the application
Fig. 03 – NFC Communication
After starting the application (see Fig. 02), simply bring the
smartphone closer to the TagTemp-S (see Fig. 03) until the data in
the register has been transferred. This typically takes a few seconds,
but depends on the smartphone model used.
The application has six screens:
1. Device Status
2. Device Settings
3. Events
4. Data Graphs
5. Preferences
6. Download
NOVUS AUTOMATION

Device Status Screen

5.2.1
Fig. 04 – Device Status Screen
Last recorded value: Shows the value of the last recorded
•
made by TagTemp-S. It does not always equal the current
temperature.
• Loggings: Indicates basic information about TagTemp-S
Log interval: Indicates the value defined of the interval
between each acquisition.
Loggings: Number of records made by TagTemp-S.
Logging state: Indicates whether the log is running, stopped
or
waiting for loggings to start
Memory usage: Indicates the memory usage mode (full or
circular).
Battery:
Indicates the status of the battery charge.
•
Good: Perfect to use.
Medium: Significant discharge is already detected. It should be
monitored.
Low: The battery is discharged. In this case, you will not be able
to send new settings or continue recording the temperature.
Device Info:
Indicates some specific information of TagTemp-S.
•
Device tag: Identification name chosen by the user.
Model: TagTemp-S.
Serial Number: Serial number engraved factory.
UID: Unique Identification Number. Useful for tracking applications.
Firmware version: Device firmware version number.
TagTemp-S
.
– Start Delay.
3/11