Related Manuals for Novus TagTemp-USB
Summary of Contents for Novus TagTemp-USB
- Page 1 TagTemp-USB TEMPERATURE LOGGER – INSTRUCTIONS MANUAL V1.0x E CE Mark This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. NOVUS AUTOMATION...
-
Page 2: Technical Data
2 TECHNICAL DATA 1 INTRODUCTION TagTemp-USB is a small portable electronic temperature logger. Its Measure Range Temperature: –20.0 °C to 70.0 °C. internal sensor measures local environment temperature and logs such values in an electronic memory. Logged data, or ± 0.5 °C @ 25 ºC. - Page 3 USB cable carefully. replacing old records with new ones as the number of readings overpasses the memory capacity. If you find it difficult to connect, make sure that the cable is properly seated. No use of force is required. NOVUS AUTOMATION...
-
Page 4: Downloading Data
The graphic curves can be vertically dragged with a right-click and 4.4 STOP / PAUSE / RESUME BUTTONS dragging the mouse up and down. These buttons will be enabled once the device is fully configured. NOVUS AUTOMATION... -
Page 5: Exporting Data
Device Status: Summarizes the state of the device, including its memory, and the occurrence of alarm events to the time of the opening of the Diagnostic page. NOVUS AUTOMATION... -
Page 6: Battery Replacement
9 WARRANTY Warranty conditions available site www.novusautomation.com/warranty. Fig. 11 • Insert a new battery and reattach the electronic board in the cabinet. Fig. 12 • Carefully connect the USB connector into the housing with the battery downward. Fig. 13 NOVUS AUTOMATION...
Need help?
Do you have a question about the TagTemp-USB and is the answer not in the manual?
Questions and answers