Operating the cleaner
SPECIAL ON-BOARD TOOLS
Your vacuum is not only a powerful carpet and rug cleaner, it's also a versatile above
fl oor vacuum cleaner when you select one of the special tools.
1.
Raise Handle to Upright Position.
2.
Grasp the end of the Hose Wand and lift Hose Wand to separate from the Hose
Wand Base.
3.
Attach tools by fi rmly pushing onto Vacuum Hose or Extension Wand.
Combination Dusting Brush/
Upholstery Tool:
Two Types of cleaning tools are
included in one attachment : rotate for
desired tool.
•
Use Brush side to dust furniture, blinds,
books, lamps, shelves, and baseboards.
•
Use Upholstery side for curtains,
draperies, cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a longer
reach.
Mini Turbo Brush (Select Models):
Use rotating brush action for small areas such as stairs and upholstery.
Note : Press gently when using Mini Turbo Brush to gain maximum cleaning. Too
much pressure could cause the brush to stop rotating.
POWER CORD STORAGE
1.
To use your vacuum, remove the cord and plug it into an electrical outlet. For your
convenience, there is a quick release cord wrap for easy cord removal.
2.
When you are fi nished cleaning, turn vacuum cleaner off.
3.
Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect
from outlet.
4.
Loop power cord around cord wraps on the back of the vacuum as shown.
5.
Clip molded plug to power cord to secure.
Quick Release
Cord Wrap
Cord Wrap
Power Cord
Combination
Combination
Dusting Brush/
Dusting Brush/
Upholstery Tool
Upholstery Tool
*option
*option
Select Models Only
Select Models Only
operating the cleaner _09
Crevice Tool
Extension
Wand
Wand
Hose Wand
Hose Wand
Base
Base
Need help?
Do you have a question about the SU4040 User Manual (Windows 7) and is the answer not in the manual?
Questions and answers