Contents Safety Instructions Product Introduction Illustration of Appliance Introduction of Components Product Operation Installation Appliance Charging Introduction of Remote Control Power ON/OFF Clean/Pause Mopping Operation APP Guide Line (POWERbot-E) Product Maintenance Cleaning Cleaning of Dust Bin and Filter Cleaning of Water Tank Cleaning of Sensor and Wheel Cleaning of Charge Terminal Cleaning of BrushRoll Assembly...
CAUTION Safety instructions SAFETY WARNING When using an electrical appliance, basis precautions should always be followed, 19. Do not expose a battery pack or appliance to fire or excessive temperature. including the following: Exposure to fire or temperature above 130°C may cause explosion. READ ALL THE INSTRCUTIONS BEFORE USING (THIS APPLIANCE), Failure to 20.
Product Introduction Illustration of Appliance Introduction of Components Bumper Dust bin Start / Pause button Filter Cover Water tank Button Docking station Power switch Dust bin Power socket Brushroll cover Water tank assembly Brushroll Button Mop attachment Wheel Water tank Water inlet Universal wheel Cover for...
Product Operation Caution Installation 1. Do not use your robot on wet surfaces or surfaces with standing water. Before using the product on a rug with tasseled edges,please fold the rug edges under. Push the side brush directly into the conver Please remove a "White bumper gasket"...
Caution Auto cleaning: The robot will clean randomly. Suction increase: Increasing the suction power. a. For the first use, please charge for 12 hours; b. When the battery is low power, please charge it as soon as possible; Suction decrease: Decreasing the suction power. c.
Clean/Pause Mopping operation Clean In standby mode, press the " " key to Make sure the power switch is in Press the button on tank and remove Attach the mop to the start zigzag cleaning the "ON" position; attachment. the tank. Caution If the appliance is in sleep state, press the “...
APP Guide Line (POWERbot-E) App quick guide Network access guide Then insert the water tank assembly into Step 1 Step 2 Press ‘‘ ’’ and start mopping. the appliance. Search “POWERbot-E” in APPLE App Click "+ Add Device" on the interface Store or Google Play Store, and download and operate as instructed.
Page 10
STEP 2. Download the SmartThings App, search “SmartThings” in APPLE App store or Google • Or, if you have a Samsung smartphone, you can add your Samsung account in the setting Play Store and download. app of your smartphone. Then, it will automatically sign in to your Samsung account.
1. It is recommended to wash it when the filter is blocked. Cleaning of Dust Bin and Filter If you want to buy the accessories, please contact a Samsung Electronics service center. 2. Before installation, make sure that filter is in a dry condition.
Cleaning of Water Tank Wipe the water tank and leave it dry. Sunlight exposure is not allowed. After the floor is mopped, pull out the water tank assembly from the rear of the main unit and remove the mop attachment and mop. Cleaning of Sensor and Wheel Wipe the sensor and the wheel gently with a cleaning tool or a soft cloth, as shown in the figure below.
Cleaning of Brushroll Assembly Clean the brushroll bar and brushroll cover with a cleaning tool or a soft cloth. (brushroll can be washed with water) Take the brushroll cover down. Caution After the brushroll is compeletly dry, install it again as per the original disassembly and assembly sequence.
Open Source Announcement is impermeable is blocked The software included in this product contains open source software. The following URL http://opensource.samsung.com/opensource/VR_5000_M/seq/0 - The power switch is not turned on - Turn on the power switch - Low battery leads to open source license information as related to this product. This o er is valid...