Revoking Maintenance Tasks For Repair Options - EVVA AirKey System Manual

If you would like to remove an operational locking component from your
access
components.
8.8.5

Revoking maintenance tasks for repair options

If you accidentally created maintenance tasks for replacement locking components or
removals without replacements, such maintenance tasks can be deleted retrospectively.
On the Home screen select the Maintenance tasks link.
>
Select the desired maintenance task from the list.
>
In the Settings tab, select the Event logs and maintenance block and click the
>
Show repair options link.
Depending on the maintenance task that is due, select whether you would like to
>
issue the replacement component (cylinder, thumb turn, wall reader) later
whether you would like to delete the maintenance task .
Click Save.
>
This will remove the maintenance task. The component status of the locking component is
updated as per the last locking component status.
Any completed maintenance tasks for repair options cannot be removed.
Also use this function to remove the "Component must be removed"
maintenance task if the locking component was removed from the AirKey
system without having been faulty.
control system, proceed
Figure 286: Deleting maintenance tasks
as described in Removing locking
or

179