EVVA AirKey System Manual page 162

As a result, the locking component status is adapted within the entire system.
The maintenance task is no longer shown and the correct firmware version is
indicated in the locking component details.
Updating firmware using coding stations:
Place the locking component on the coding station. Updates launch
>
automatically once the coding station starts communicating with the
locking component.
A confirmation appears once the update has been completed.
Figure 262: Coding station – confirmation upon updating locking components
A corresponding link
locking component.
Click Run firmware update to start the process.
>
Figure 263: Coding station – AirKey cylinder firmware updates
Firmware updates may take several minutes, depending on the
Internet connection. Do not remove the locking component from
the coding station during this period.
A confirmation prompt completes the first step of the firmware update.
is shown if a firmware update is available for the

162