Batteries; Specifications - Fluke PLS XLD User Manual

Batteries

Replace the battery when the battery indicator shows a low battery.
To install or replace the battery (See Figure 3.):
1. Open the battery door.
2. Install one AA battery with the correct polarity.
3. Close the battery door.
1

Specifications

Capture height
Numeric readout height
Reception angle
Detectable spectrum
Working radius
Beeper volume
Off
Low
High
Automatic shutoff
Internal filter against
Marking notch
Size (H x W x L)
Weight without clamp
Battery
Battery life, continuous use
2
Figure 3. Battery Replacement
60 mm (2.4 in)
50 mm (2.0 in)
±45 °
450 nm to 800 nm (blue, green, red, NIR)
300 m (984 ft), depending on the laser level
0 dBA
≥75 dBA
≥100 dBA
30 min without use or laser detection
Flash, sunlight, LED, fluorescent lamps
41 mm from top edge
135 mm x 69 mm x 25 mm (5.3 in x 2.7 in x 1.0 in)
∼0.19 kg (0.42 lb)
1 x AA Alkaline IEC LR6
≥50 hours
3
Laser Detectors
Specifications
9