Batteries; Specifications - Fluke LDR User Manual

LDR, LDG
Users Manual

Batteries

Replace the batteries when the battery indicator shows a
low battery.
To install or replace the batteries (See Figure 4.):
1. Remove the Product from the holster.
2. Open the battery compartment.
3. Install one 9 V batter with the correct polarity.
4. Close the battery compartment.
5. Put the Product back into the holster.
1
2
Figure 4. Battery Replacement
8
3

Specifications

Working Range..................≥6 m to ≤60 m
Accuracy
Fine .................................0.75 mm
Medium ...........................1.75 mm
Power
Batteries..........................1 x 9 V Alkaline IEC LR61
Battery Life......................≥30 hrs, continuous use
Dimensions
(H x W x L) .........................94 mm x 94 mm x 42 mm
Weight ................................0.20 kg
Temperature
Operating ........................-18 °C to +50 °C
Storage ...........................-40 °C to +70 °C
with battery: -20 °C to +50 °C
Relative Humidity..............0 % to 90 % (0 °C to 35 °C)
0 % to 75 % (35 °C to 40 °C)
0 % to 45 % (40 °C to 50 °C)
Altitude
Operating ........................2000 m
Storage ...........................12 000 m
Safety .................................IEC 61010-1: Pollution Degree 2