Remove The Safety Lock From The Mounting Base - Cavius 2107-001 User Manual

Press the button on the top of one alarm only. This alarm will become the
'Master' and will start sending out a specific house code to the other alarms
(take note of which alarm is the 'Master', you may need this for adding extra
devices in future). The red LED will flash.
As the other alarms receive the specific house code, they will also flash the
LED light. When all alarms flash the red LED, they are connected and can be
switched out of 'Link Mode' and installed.
8
Remove the Safety lock from the
mounting base.
Place the Safety lock into the slot once
the alarm has been clicked into the
base. To remove the Safety lock in
future, you will require a screwdriver and
we advise to not be too forceful when
removing.
9