Normal Mode; Alarm Mode; Hush Function - Cavius 2107-001 User Manual

7. Normal mode:

In normal mode the LED will flash every 48 seconds to show the alarm is
functioning.

8. Alarm mode:

When a concentration of smoke is detected, the smoke alarm will go into
'Alarm Mode'. It will sound the alarm signal and the LED will flash. Please note
that only the source alarm's LED will flash, so it can be identified.
The smoke alarm will also transmit the alarm signal to the other connected
alarms, which will also sound the alarm signal after a short delay.
16

9. Hush function:

If the smoke alarms are to set into a false alarm by cooking, fireplace, etc.
all of them can be paused for 10 minutes by pressing the test button on the
originating smoke alarm only (indicated by the flashing LED).
You can hush each alarm individually, however the source alarm will continue
to sound until hushed.
The reason for this is that it is necessary to locate the source of the alarm
before using the hush function. This is to make sure that it is not a life
threat ening situation.
17