INSTALL WITH BASE SETUP
Infants may have difficulty breathing when in a sitting position. Make
sure the seat is reclined properly so that your child's head does not fall
forward. Failure to properly recline the Child Restraint could increase
the child's risk of serious injury or death.
See page 16 for "Vehicle Seating Positions" before installing. Make
1
sure the vehicle is on a level surface. Place Base on selected vehicle
seat. Make sure it is not blocking the vehicle seat belt buckle.
L EVEL
Set Base Stage Lever to the correct Stage, depending on your child. See pages
2
26-29 for more information (2a). Locate the Bubble Level Indicator and adjust the
seat recline by pulling up on the center Leveling Foot Adjuster until the Bubble falls
between the arrows on the Bubble Level Indicator (2b).
Installation Options:
• LATCH installation continued on page 32
• Lap-Shoulder Belt installation continued on page 38
• Lap Belt Only installation continued on page 44
30
2b
INSTALL WITH BASE SETUP
31