Base Release Handle; Latch Storage - Chicco Fit2 Cienna User Manual

BASE RELEASE HANDLE

RELEASE CARRIER FROM BASE:
To unhook the Carrier from the Base, squeeze the Base Release Handle
on the back of the Carrier then lift up on the Carry Handle.
76
Store LATCH Connectors properly in the compartments when
not using for installation.
Store both LATCH Connector in compartments on either side of the Base when not in use.
1
Insert LATCH Connectors into the storage compartments.
2 Pull on the LATCH Pull Strap to secure LATCH Connectors in the
compartments.
3 Roll LATCH Pull Strap and store in Pull Strap Storage Compartment.
1 2

LATCH STORAGE

3
77